NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
A-Tech
4GB DDR3 1333MHz ECC registered DIMM with 2Rx4 organisation for server upgrades
This 4 GB DDR3 registered DIMM operates at 1333 MHz with CL9 latency and 1.5 V power. It uses a 2Rx4 organisation and carries ECC for error correction in server and workstation platforms. The module is built as a compatible equivalent for the Hynix HMT351V7BMR4C-H9 part number. All units are tested for reliability before shipment.
Administrators upgrading or repairing systems that require registered ECC memory at the PC3-10600 speed grade will find this module a direct fit. Builders whose platforms accept only unbuffered UDIMMs, or those requiring a different voltage, speed, rank configuration or DDR generation, should select a module matching those specifications. Verify the motherboard qualified-vendor list before ordering.
The registered buffer and ECC circuitry allow the memory controller to address larger capacities while detecting and correcting single-bit errors. Systems that mandate registered DIMMs and a 2Rx4 rank layout will recognise this module; platforms limited to unbuffered memory or a different rank structure will not support it. Check the system documentation for the required registration and rank combination.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix |
| Model | HMT351V7BMR4C-H9 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | HMT351V7BMR4C-H9 |
The 240-pin DDR3 DIMM socket is a passive connector rated for many insertion cycles; it does not wear out under normal server operation and requires no scheduled replacement.
The CL9 latency at 1333 MHz sets the maximum sustained bandwidth; the memory controller cannot push data faster than the rated PC3-10600 ceiling.
At 1.5 V the module draws standard DDR3 power; registered ECC operation adds minimal overhead, so a normal server airflow path keeps temperatures within spec.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?