NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
A-Tech
8GB DDR3 1066MHz ECC registered DIMM with 4Rx8 organisation for server and workstation upgrades
This 8GB DDR3 module runs at 1066MHz (PC3-8500) with CL3 latency and 1.50V operation. It is built as an ECC registered DIMM using a 4Rx8 organisation for error-correcting server and workstation platforms. The 240-pin form factor fits standard DDR3 DIMM slots in compatible systems.
The module is specified as a compatible replacement for the Elpida EBJ82RF8BCFA-AE-F part number. Builders can use it to match existing memory configurations that require this exact Elpida reference. Verification of the host system's supported memory specifications remains essential before installation.
DDR3 technology tops out at lower transfer rates and higher voltages than later generations. Registered DIMMs add a clock cycle of latency and require chipset support for buffered operation. The 4Rx8 density may exceed the rank-per-channel limits of some older memory controllers. 8GB capacity per module restricts total system memory on platforms with few DIMM slots.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Elpida |
| Model | EBJ82RF8BCFA-AE-F |
| Capacity | 8GB |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL3 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx8 |
| Chipset | Major Brand Chipset |
| Features | EBJ82RF8BCFA-AE-F |
DDR3 ECC RDIMM modules have no scheduled replacement interval; they run until a correctable error rate rises or a hard failure occurs, which typically takes many years in normal server workloads.
The 1.50 V DDR3 standard voltage and 4Rx8 organisation set the thermal and signal-integrity ceiling; sustained maximum bandwidth will hit the JEDEC-defined timing and temperature envelope before any other constraint.
At 1.50 V the module draws only the power required for DDR3 1066 operation; registered buffering adds negligible overhead, so heat output stays within standard DIMM thermal limits for enclosed server chassis.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?