OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
A-Tech
8GB DDR5 laptop SODIMM running at 5600 MHz with CL40 timing and 1.10 V operation
This A-Tech 8GB DDR5 5600 SODIMM module is built as a direct replacement for Dell part SNPF7YCYC/8G. It fits laptops, notebooks, and all-in-one systems that require a 262-pin DDR5 SO-DIMM running at 5600 MT/s with a CAS latency of 40. The stick operates at the standard DDR5 voltage of 1.10V and uses unbuffered, non-ECC architecture with 1Rx16 organisation.
The module suits owners of compatible Dell systems who need an 8GB capacity boost in a single slot. It is not for users whose machines require registered or ECC memory, nor for builds that need a heat spreader on the module. Buyers who want more storage should look at solid-state drives instead. Systems limited to a different DDR generation will not accept this stick.
The decisive specification is the 262-pin DDR5 SO-DIMM form factor combined with DDR5 5600 (PC5-44800) speed. Only platforms that explicitly support this exact pin layout and data rate can install the module. Check your system manual for proper seating and channel guidelines before purchasing.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Dell SNPF7YCYC/8G |
| Model | A-Tech 8GB DDR5-5600 Laptop RAM Module |
| Capacity | 8GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
| Recommend Use | Compatible Replacement for Dell SNPF7YCYC/8G |
Yes, this module is built as a direct replacement for Dell SNPF7YCYC/8G and uses the standard 262-pin DDR5 SO-DIMM form factor.
Insert the module at the proper angle until the gold contacts disappear, then press down firmly until both side clips click into place; the step often missed is pressing evenly on both ends so both clips engage.
No, the module runs at the standard 1.1 V DDR5 voltage with fixed timings (CL40) and requires no firmware updates or manual voltage changes during its service life.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?