نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with black chips, 262-pin DDR5 SODIMM laptop memory module

A-Tech

A-Tech 8GB DDR5 5600 SODIMM Laptop RAM

SKU CH-GBEY-KCRN3

8GB DDR5 laptop SODIMM running at 5600 MHz with CL40 timing and 1.10 V operation

  • Capacity8GB
  • Type262-Pin DDR5 SO-DIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency40
  • Voltage1.10V
  • ECCNo
  • Boosts multitasking with 8GB DDR5 5600MHz capacity
  • Runs efficiently at standard 1.1V DDR5 voltage
  • Fits laptops using 262-pin DDR5 SO-DIMM slots
  • Non-ECC unbuffered design for consumer notebook compatibility
  • Tested for reliable performance in Dell SNPF7YCYC/8G systems

Compatible Dell Replacement

This A-Tech 8GB DDR5 5600 SODIMM module is built as a direct replacement for Dell part SNPF7YCYC/8G. It fits laptops, notebooks, and all-in-one systems that require a 262-pin DDR5 SO-DIMM running at 5600 MT/s with a CAS latency of 40. The stick operates at the standard DDR5 voltage of 1.10V and uses unbuffered, non-ECC architecture with 1Rx16 organisation.

Ideal for Single-Slot Upgrades

The module suits owners of compatible Dell systems who need an 8GB capacity boost in a single slot. It is not for users whose machines require registered or ECC memory, nor for builds that need a heat spreader on the module. Buyers who want more storage should look at solid-state drives instead. Systems limited to a different DDR generation will not accept this stick.

262-Pin DDR5 SO-DIMM Form Factor

The decisive specification is the 262-pin DDR5 SO-DIMM form factor combined with DDR5 5600 (PC5-44800) speed. Only platforms that explicitly support this exact pin layout and data rate can install the module. Check your system manual for proper seating and channel guidelines before purchasing.

أبرز المميزات

  • Boosts multitasking with 8GB DDR5 5600MHz capacity
  • Runs efficiently at standard 1.1V DDR5 voltage
  • Fits laptops using 262-pin DDR5 SO-DIMM slots
  • Non-ECC unbuffered design for consumer notebook compatibility
  • Tested for reliable performance in Dell SNPF7YCYC/8G systems

المواصفات

BrandA-Tech
SeriesCompatible Replacement for Dell SNPF7YCYC/8G
ModelA-Tech 8GB DDR5-5600 Laptop RAM Module
Capacity8GB
Type262-Pin DDR5 SO-DIMM
SpeedDDR5 5600 (PC5 44800)
CAS Latency40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseCompatible Replacement for Dell SNPF7YCYC/8G

أسئلة حول هذا المنتج

Does the 262-pin DDR5 SODIMM fit my Dell laptop that uses the SNPF7YCYC/8G part?

Yes, this module is built as a direct replacement for Dell SNPF7YCYC/8G and uses the standard 262-pin DDR5 SO-DIMM form factor.

What is the correct way to seat the module, and what step do people often miss?

Insert the module at the proper angle until the gold contacts disappear, then press down firmly until both side clips click into place; the step often missed is pressing evenly on both ends so both clips engage.

Will the 1.1 V DDR5 module need any firmware update or voltage adjustment later?

No, the module runs at the standard 1.1 V DDR5 voltage with fixed timings (CL40) and requires no firmware updates or manual voltage changes during its service life.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.