אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Six black PCI-E riser boards with USB 3.0 cables and LED indicator lights

AFRNDK

AFRNDK 6PCS PCI-E Riser VER010-X USB 3.0 Mining Hardware

SKU CH-FXXY-4CNNP

Six PCI-E riser boards with eight capacitors each, LED fault indicators and USB 3.0 cables at 60 cm for GPU mining rigs

  • Thick boards add durability for heavy GPUs
  • Extra solder on underside reduces short-circuit risk
  • Dual 6-pin plus Molex power inputs on each riser
  • Seven onboard LEDs simplify fault monitoring
  • Six sets include 60 cm USB 3.0 cables

6-Pack PCIe Riser Kit for Mining

The AFRNDK 6PCS PCI-E Riser VER010-X USB 3.0 set provides six complete riser assemblies designed to connect graphics cards to a motherboard for cryptocurrency mining rigs. Each unit includes a riser board, a 1X chip board with LED indicator, and a 60cm USB 3.0 cable. This kit targets builders assembling multi-GPU mining systems who need multiple risers in a single purchase.

Dual Power Input Options on Each Riser

Every riser board in this kit features onboard Molex and dual 6-pin power connectors, allowing the installer to choose the cable type that matches the available power supply leads. The boards use an 8-capacitor design with reinforced soldering on the underside to reduce the risk of shorts during continuous operation. Six LED indicators on the main board and one on the chip board provide visual status feedback for troubleshooting.

Suits Builders Needing Multiple USB 3.0 Risers

This package suits miners who want a ready bundle of six risers with 60cm cables and the option of Molex or 6-pin power on each unit. It is not for builders who require longer cables than 60cm, need a different interface than USB 3.0, or want a single riser rather than a six-pack. The fixed cable length and pack quantity define the use case.

נקודות עיקריות

  • Thick boards add durability for heavy GPUs
  • Extra solder on underside reduces short-circuit risk
  • Dual 6-pin plus Molex power inputs on each riser
  • Seven onboard LEDs simplify fault monitoring
  • Six sets include 60 cm USB 3.0 cables

מפרט טכני

טרם פורסם מפרט טכני לפריט זה.

שאלות על הפריט הזה

How does the 16-lane slot on the riser actually connect to the motherboard?

The riser presents a full-size x16 slot to the graphics card but routes only a single lane through the USB 3.0 cord to a x1 host connector.

What practical bandwidth limit does the USB 3.0 cord impose on the GPU?

The cord carries one PCIe lane at USB 3.0 speed, capping throughput well below a native x16 connection and making it suitable only for mining workloads.

What clearance and power connectors are required to install each riser?

Each board needs a USB 3.0 header or cable, plus either a Molex plug or one of the two onboard 6-pin sockets, and 60 cm of cord length for spacing.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.