אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black vibration-absorbing standoff kit with four absorbers, screws, washers and nuts

Alphacool

Alphacool Decoupling Standoff Kit 13701 Model 52007 Black

SKU CH-B03W-GQG2D

Vibration-absorbing standoffs and hardware isolate water-cooling pumps and other components for near-silent operation

  • ColorBlack
  • FeaturesVibration absorbing standoffs and screws from Alphacool.
  • Vibration-free pump mounting keeps the enclosure silent
  • Decoupling standoffs absorb vibration so noise cannot amplify
  • Four absorbers, screws, washers and nuts included for secure fitting
  • Kit works with any water-cooling component needing isolation
  • Black finish matches dark-themed builds

Pump vibration isolation

The Alphacool Decoupling Standoff Kit 13701 Model 52007 provides vibration-free mounting for water-cooling pumps inside a PC enclosure. Four black vibration absorbers with matching screws washers and nuts prevent pump vibration from transferring to the chassis. The pump runs almost inaudibly as a result. Other components can also be mounted with the same kit.

Simple four-point installation

Each corner uses one absorber one screw one washer and one nut so the hardware fits standard pump mounting holes. The parts are small and can drop into tight spaces around tubing so keep them contained during assembly. Over-tightening the nuts reduces the absorber travel and defeats the isolation.

Builders silencing a noisy pump

This kit suits anyone who hears pump hum transmitted through the case and wants a direct mechanical fix. It does not help if the noise comes from fluid turbulence or coil whine. Buyers needing adjustable-height mounts or larger thread sizes should look at something else.

נקודות עיקריות

  • Vibration-free pump mounting keeps the enclosure silent
  • Decoupling standoffs absorb vibration so noise cannot amplify
  • Four absorbers, screws, washers and nuts included for secure fitting
  • Kit works with any water-cooling component needing isolation
  • Black finish matches dark-themed builds

מפרט טכני

BrandAlphacool
Model52007
ColorBlack
FeaturesVibration absorbing standoffs and screws from Alphacool.

שאלות על הפריט הזה

How can I confirm the Alphacool 52007 standoffs are absorbing pump vibration after installation?

Power on the loop and listen at the case panel; the pump should be almost inaudible with no resonant hum transmitted to the chassis.

What hardware is included with the 13701 kit and what must I source separately?

The box contains four vibration absorbers, four mounting screws, four washers and four nuts; you only need to provide the pump or component you intend to mount.

Which version of the Alphacool decoupling kit should I choose for a standard D5 or DDC pump?

Model 52007 (part 13701) is the single black kit designed for vibration-free mounting of typical water-cooling pumps and other components.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.