אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Coil of grey filament on a spool, 2.85 mm diameter, 750 g

E3D Online

E3D Online spoolWorks MatX ASA Filament 2.85mm 750g Basalt Grey45 3d printers accessory

SKU CH-HAGC-02TTF

Strong, tough ASA filament with a smooth satin finish, accurate flow for tiny nozzles, and Scaffold Snap compatibility

  • ColorGray
  • TypeFilament
  • Strong ASA filament prints easily with excellent layer adhesion
  • Smooth satin finish replaces ABS for better surface quality
  • Accurate printing down to 0.15 mm nozzles thanks to exceptional flow
  • Pairs with Scaffold Snap for reliable support and clean breakaway
  • About ten times the weathering and UV resistance of ABS

Filament for detailed prints

E3D spoolWorks MatX ASA filament is a strong, tough material designed for makers who need accurate results with a smooth satin finish. It replaces ABS in functional parts while delivering better layer adhesion and about ten times the weathering and UV resistance. The formulation suits users printing detailed models on printers that accept 2.85mm filament.

Works with standard 2.85mm systems

The 750g spool feeds directly into any fused-filament printer equipped for 2.85mm diameter material without hardware changes. Exceptional flow properties allow reliable extrusion through very small nozzles such as the experimental 0.15mm size. It pairs with Scaffold Snap support material for firm adhesion and clean breakaway on complex geometries.

Thermal behaviour in normal use

As an ASA-based filament MatX provides higher long-term heat resistance than ABS and resists common cleaning chemicals. The material prints at typical ASA temperatures so existing printer profiles remain valid. Good flow reduces the risk of nozzle pressure build-up during long prints, keeping extrusion consistent across detailed features.

נקודות עיקריות

  • Strong ASA filament prints easily with excellent layer adhesion
  • Smooth satin finish replaces ABS for better surface quality
  • Accurate printing down to 0.15 mm nozzles thanks to exceptional flow
  • Pairs with Scaffold Snap for reliable support and clean breakaway
  • About ten times the weathering and UV resistance of ABS

מפרט טכני

BrandE3D
ModelMatX
ColorGray
TypeFilament

שאלות על הפריט הזה

How small a nozzle can MatX ASA filament reliably print with?

MatX ASA works well with tiny nozzles down to 0.15 mm, giving accurate detail on fine features.

Does this ASA filament produce strong odours or need an actively heated chamber during long prints?

ASA prints with less odour than ABS and does not require an actively heated chamber, though an enclosure helps prevent warping on large parts.

What support material works with MatX ASA for clean breakaway on complex models?

Scaffold Snap support material bonds to MatX ASA and breaks away cleanly, leaving a smooth surface on overhangs.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.