暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Coil of grey filament on a spool, 2.85 mm diameter, 750 g

E3D Online

E3D Online spoolWorks MatX ASA Filament 2.85mm 750g Basalt Grey45 3d printers accessory

SKU CH-HAGC-02TTF

Strong, tough ASA filament with a smooth satin finish, accurate flow for tiny nozzles, and Scaffold Snap compatibility

  • ColorGray
  • TypeFilament
  • Strong ASA filament prints easily with excellent layer adhesion
  • Smooth satin finish replaces ABS for better surface quality
  • Accurate printing down to 0.15 mm nozzles thanks to exceptional flow
  • Pairs with Scaffold Snap for reliable support and clean breakaway
  • About ten times the weathering and UV resistance of ABS

Filament for detailed prints

E3D spoolWorks MatX ASA filament is a strong, tough material designed for makers who need accurate results with a smooth satin finish. It replaces ABS in functional parts while delivering better layer adhesion and about ten times the weathering and UV resistance. The formulation suits users printing detailed models on printers that accept 2.85mm filament.

Works with standard 2.85mm systems

The 750g spool feeds directly into any fused-filament printer equipped for 2.85mm diameter material without hardware changes. Exceptional flow properties allow reliable extrusion through very small nozzles such as the experimental 0.15mm size. It pairs with Scaffold Snap support material for firm adhesion and clean breakaway on complex geometries.

Thermal behaviour in normal use

As an ASA-based filament MatX provides higher long-term heat resistance than ABS and resists common cleaning chemicals. The material prints at typical ASA temperatures so existing printer profiles remain valid. Good flow reduces the risk of nozzle pressure build-up during long prints, keeping extrusion consistent across detailed features.

特長

  • Strong ASA filament prints easily with excellent layer adhesion
  • Smooth satin finish replaces ABS for better surface quality
  • Accurate printing down to 0.15 mm nozzles thanks to exceptional flow
  • Pairs with Scaffold Snap for reliable support and clean breakaway
  • About ten times the weathering and UV resistance of ABS

仕様

BrandE3D
ModelMatX
ColorGray
TypeFilament

この商品に関する質問

How small a nozzle can MatX ASA filament reliably print with?

MatX ASA works well with tiny nozzles down to 0.15 mm, giving accurate detail on fine features.

Does this ASA filament produce strong odours or need an actively heated chamber during long prints?

ASA prints with less odour than ABS and does not require an actively heated chamber, though an enclosure helps prevent warping on large parts.

What support material works with MatX ASA for clean breakaway on complex models?

Scaffold Snap support material bonds to MatX ASA and breaks away cleanly, leaving a smooth surface on overhangs.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。