BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 $
0.00278135BTC
במלאי
G.SKILL
G.SKILL F3-2133C10Q-32GSR 32GB (4 x 8GB) DDR3 2133 CL10 desktop RAM
A 32 GB quad-channel DDR3 kit running at 2133 MHz with CL10 timings and 1.60 V for Intel LGA1155 platforms
- Capacity32GB (4 x 8GB)
- SpeedDDR3 2133 (PC3 17000)
- CAS LatencyCL10
- Timing10-12-12-31
- Voltage1.60V
- ECCNo
- 32 GB quad-channel kit removes bandwidth bottlenecks with four 8 GB modules
- DDR3 2133 speed at CL10 10-12-12-31 timing delivers low-latency responsiveness
- 60 V operation enables Intel XMP profiles on LGA 1155 platforms
- Sniper rifle heat spreader design keeps modules cool during extended sessions
- Rigorous in-house stress testing ensures stability for long gaming workloads
Sniper Series 32GB quad-channel kit
This G.SKILL Sniper Series kit delivers 32GB of DDR3 memory across four 8GB modules rated at 2133 MT/s with CL10 timing. It targets enthusiasts building or refreshing quad-channel Intel LGA1155 platforms who need high bandwidth and low latency for gaming or heavy multitasking. The 1.60V operating voltage and XMP support simplify stable configuration on compatible boards.
Upgrade from dual-channel or lower-speed DDR3
Moving from a dual-channel DDR3 kit or modules rated below 2133 MT/s removes a bandwidth bottleneck on quad-channel chipsets and raises peak throughput to PC3 17000 levels. The jump is worthwhile when the motherboard exposes four channels and the workload benefits from sustained memory throughput such as large dataset processing or high-refresh-rate gaming. Systems limited to dual-channel operation or locked to lower memory multipliers will not realise the full gain.
Straightforward DIMM installation with XMP
Installation follows standard desktop DIMM procedure: align the notch, press firmly until the retention clips latch, and enable the XMP profile in UEFI to load the 10-12-12-31 timings at 1.60V. Common issues include seating modules incompletely on tight-spaced boards, forgetting to enable XMP so the kit runs at default JEDEC speeds, and mixing with dissimilar kits that prevent the quad-channel controller from training at the rated frequency.
נקודות עיקריות
- 32 GB quad-channel kit removes bandwidth bottlenecks with four 8 GB modules
- DDR3 2133 speed at CL10 10-12-12-31 timing delivers low-latency responsiveness
- 60 V operation enables Intel XMP profiles on LGA 1155 platforms
- Sniper rifle heat spreader design keeps modules cool during extended sessions
- Rigorous in-house stress testing ensures stability for long gaming workloads
מפרט טכני
| Brand | G.SKILL |
|---|---|
| Series | Sniper Series |
| Model | F3-2133C10Q-32GSR |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR3 2133 (PC3 17000) |
| CAS Latency | CL10 |
| Timing | 10-12-12-31 |
| Voltage | 1.60V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Quad Channel Kit |
| Color | Black |
| Features | Compatible with Intel LGA1155 platforms Intel XMP support for 2nd and 3rd Generation Intel Core Processors |
| משקל משלוח | 0.20 kg |
| מידות האריזה | 215 × 135 × 25 mm |
שאלות על הפריט הזה
Will the 1.60V DDR3 2133 quad-channel kit fit a standard Intel LGA1155 motherboard slot?
Yes, the unbuffered DDR3 DIMMs use the standard 240-pin desktop form factor and are validated for Intel LGA1155 platforms with XMP profiles.
How do I enable the CL10 10-12-12-31 timings on my board, and what step is often missed?
Enable the Intel XMP profile in the BIOS after installing all four 8GB modules; the common miss is leaving the memory voltage at auto instead of confirming 1.60V.
When should I reseat or replace the black Sniper heat-spreader modules in a quad-channel setup?
Reseat if the system fails to POST or shows memory errors; replace only if modules fail extended memory testing, as the heat spreaders are non-removable and require no separate maintenance.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
