我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four black DDR3 DIMMs with sniper heat spreaders

G.SKILL

G.SKILL F3-2133C10Q-32GSR 32GB (4 x 8GB) DDR3 2133 CL10 desktop RAM

SKU CH-FJSS-RGDTJ MPN F3-2133C10Q-32GSR

A 32 GB quad-channel DDR3 kit running at 2133 MHz with CL10 timings and 1.60 V for Intel LGA1155 platforms

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 2133 (PC3 17000)
  • CAS LatencyCL10
  • Timing10-12-12-31
  • Voltage1.60V
  • ECCNo
  • 32 GB quad-channel kit removes bandwidth bottlenecks with four 8 GB modules
  • DDR3 2133 speed at CL10 10-12-12-31 timing delivers low-latency responsiveness
  • 60 V operation enables Intel XMP profiles on LGA 1155 platforms
  • Sniper rifle heat spreader design keeps modules cool during extended sessions
  • Rigorous in-house stress testing ensures stability for long gaming workloads

Sniper Series 32GB quad-channel kit

This G.SKILL Sniper Series kit delivers 32GB of DDR3 memory across four 8GB modules rated at 2133 MT/s with CL10 timing. It targets enthusiasts building or refreshing quad-channel Intel LGA1155 platforms who need high bandwidth and low latency for gaming or heavy multitasking. The 1.60V operating voltage and XMP support simplify stable configuration on compatible boards.

Upgrade from dual-channel or lower-speed DDR3

Moving from a dual-channel DDR3 kit or modules rated below 2133 MT/s removes a bandwidth bottleneck on quad-channel chipsets and raises peak throughput to PC3 17000 levels. The jump is worthwhile when the motherboard exposes four channels and the workload benefits from sustained memory throughput such as large dataset processing or high-refresh-rate gaming. Systems limited to dual-channel operation or locked to lower memory multipliers will not realise the full gain.

Straightforward DIMM installation with XMP

Installation follows standard desktop DIMM procedure: align the notch, press firmly until the retention clips latch, and enable the XMP profile in UEFI to load the 10-12-12-31 timings at 1.60V. Common issues include seating modules incompletely on tight-spaced boards, forgetting to enable XMP so the kit runs at default JEDEC speeds, and mixing with dissimilar kits that prevent the quad-channel controller from training at the rated frequency.

商品特色

  • 32 GB quad-channel kit removes bandwidth bottlenecks with four 8 GB modules
  • DDR3 2133 speed at CL10 10-12-12-31 timing delivers low-latency responsiveness
  • 60 V operation enables Intel XMP profiles on LGA 1155 platforms
  • Sniper rifle heat spreader design keeps modules cool during extended sessions
  • Rigorous in-house stress testing ensures stability for long gaming workloads

商品規格

BrandG.SKILL
SeriesSniper Series
ModelF3-2133C10Q-32GSR
Capacity32GB (4 x 8GB)
SpeedDDR3 2133 (PC3 17000)
CAS LatencyCL10
Timing10-12-12-31
Voltage1.60V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
ColorBlack
FeaturesCompatible with Intel LGA1155 platforms
Intel XMP support for 2nd and 3rd Generation Intel Core Processors
出貨重量0.20 kg
包裝尺寸215 × 135 × 25 mm

商品問答

Will the 1.60V DDR3 2133 quad-channel kit fit a standard Intel LGA1155 motherboard slot?

Yes, the unbuffered DDR3 DIMMs use the standard 240-pin desktop form factor and are validated for Intel LGA1155 platforms with XMP profiles.

How do I enable the CL10 10-12-12-31 timings on my board, and what step is often missed?

Enable the Intel XMP profile in the BIOS after installing all four 8GB modules; the common miss is leaving the memory voltage at auto instead of confirming 1.60V.

When should I reseat or replace the black Sniper heat-spreader modules in a quad-channel setup?

Reseat if the system fails to POST or shows memory errors; replace only if modules fail extended memory testing, as the heat spreaders are non-removable and require no separate maintenance.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。