SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
HP
A 300 GB, 15000 RPM SAS internal hard drive in a 2.5 inch form factor designed for server workloads
This 300 GB internal hard drive uses a SAS 6Gb/s interface and spins at 15000 RPM. The 2.5 inch form factor fits standard SFF server bays and supports hot-plug installation. It is designed for enterprise servers that require consistent transaction throughput. The drive targets IT administrators managing high-I/O workloads in 24/7 data-centre environments.
The 15000 RPM spindle speed produces higher heat output and audible noise than lower-speed drives, so adequate chassis airflow is required. Power draw rises during sustained random I/O typical of database or virtualisation workloads. The SAS interface maintains stable performance under continuous duty cycles. Operators should plan cooling and power budgets for arrays of these drives.
The drive ships in an HP hot-plug carrier that enables tool-less insertion and removal from compatible server backplanes. This reduces service time during drive replacement without powering down the host. A three-year manufacturer warranty covers the drive under normal enterprise operating conditions. Retail or OEM packaging may vary but the carrier and warranty terms remain the same.
| Brand | HP |
|---|---|
| Model | 652611-B21 |
| Interface | SAS 6Gb/s |
| Capacity | 300GB |
| RPM | 15000 RPM |
| Features | HP SAS Enterprise and Midline hard drives deliver high performance solutions for hosting high transaction based applications. Available in HP hot plug carriers or non-hot plug. HP SAS Enterprise and Midline hard drives come in both 2.5-inch (SFF) and 3.5-inch (LFF) industry standard form factors and are available in a variety of capacity points to meet a wide range of requirements. The SAS interface was designed and engineered for high availability, enterprise-class data storage where performance, reliability and data integrity are crucial. |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| Height (maximum) | 15.6 mm |
| Width (maximum) | 75.7 mm |
| Length (maximum) | 118.7 mm |
| משקל משלוח | 0.91 kg |
| מידות האריזה | 119 × 76 × 15 mm |
Slide the 652611-B21 into the carrier until the SAS connector seats firmly, then lock the carrier latch; the step often missed is fully engaging the latch so the drive registers as hot-pluggable.
The sealed 15.6 mm mechanism has no user-serviceable parts; plan to replace the entire drive after its rated service life or if SMART attributes report reallocated sectors.
The 6Gb/s SAS interface caps sustained throughput, so long sequential writes will hit the bus ceiling before the 15000 RPM platters become the bottleneck.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?