SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
HP
A 300 GB, 15000 RPM SAS internal hard drive in a 2.5 inch form factor designed for server workloads
This 300 GB internal hard drive uses a SAS 6Gb/s interface and spins at 15000 RPM. The 2.5 inch form factor fits standard SFF server bays and supports hot-plug installation. It is designed for enterprise servers that require consistent transaction throughput. The drive targets IT administrators managing high-I/O workloads in 24/7 data-centre environments.
The 15000 RPM spindle speed produces higher heat output and audible noise than lower-speed drives, so adequate chassis airflow is required. Power draw rises during sustained random I/O typical of database or virtualisation workloads. The SAS interface maintains stable performance under continuous duty cycles. Operators should plan cooling and power budgets for arrays of these drives.
The drive ships in an HP hot-plug carrier that enables tool-less insertion and removal from compatible server backplanes. This reduces service time during drive replacement without powering down the host. A three-year manufacturer warranty covers the drive under normal enterprise operating conditions. Retail or OEM packaging may vary but the carrier and warranty terms remain the same.
| Brand | HP |
|---|---|
| Model | 652611-B21 |
| Interface | SAS 6Gb/s |
| Capacity | 300GB |
| RPM | 15000 RPM |
| Features | HP SAS Enterprise and Midline hard drives deliver high performance solutions for hosting high transaction based applications. Available in HP hot plug carriers or non-hot plug. HP SAS Enterprise and Midline hard drives come in both 2.5-inch (SFF) and 3.5-inch (LFF) industry standard form factors and are available in a variety of capacity points to meet a wide range of requirements. The SAS interface was designed and engineered for high availability, enterprise-class data storage where performance, reliability and data integrity are crucial. |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
| Height (maximum) | 15.6 mm |
| Width (maximum) | 75.7 mm |
| Length (maximum) | 118.7 mm |
| وزن الشحنة | 0.91 kg |
| أبعاد الطرد | 119 × 76 × 15 mm |
Slide the 652611-B21 into the carrier until the SAS connector seats firmly, then lock the carrier latch; the step often missed is fully engaging the latch so the drive registers as hot-pluggable.
The sealed 15.6 mm mechanism has no user-serviceable parts; plan to replace the entire drive after its rated service life or if SMART attributes report reallocated sectors.
The 6Gb/s SAS interface caps sustained throughput, so long sequential writes will hit the bus ceiling before the 15000 RPM platters become the bottleneck.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟