אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Refurbished HP 2.5 inch SATA enterprise SSD with quick-release handle

HP

HP 718192-B21 800GB 2.5" SATA enterprise SSD

SKU CH-HA3T-VP5W6 MPN 718192-B21

Refurbished 800GB 2.5" SATA enterprise SSD with MLC memory and 0.1 ms seek time

  • Form Factor2.5"
  • Memory ComponentsMLC
  • InterfaceSATA
  • Seek Time0.1 ms
  • Height0.38"
  • Width3.45"
  • 800 GB capacity stores large server datasets
  • SATA 6 Gb/s interface connects to standard controllers
  • MLC memory balances endurance and value for enterprise workloads
  • 5 inch quick-release form factor fits hot-swap bays
  • 1 ms seek time accelerates random read performance

HP 800GB SATA enterprise SSD

This refurbished HP 718192-B21 drive provides 800GB of MLC flash storage in a 2.5 inch form factor with a SATA 6Gb/s interface. It is designed for read-intensive server workloads where consistent latency and endurance matter. The Quick-Release carrier simplifies hot-swap installation in compatible HP ProLiant bays. A 90 day warranty covers the factory-original unit.

Suited for capacity refresh in SATA arrays

Administrators replacing failed or undersized SATA SSDs in existing HP Gen8 or Gen9 arrays will find a direct mechanical and electrical match. Buyers needing higher throughput than the SATA bus can deliver should look elsewhere. The MLC memory targets mixed-use profiles rather than write-heavy logging or caching tiers. Systems limited to 3Gb/s backplanes will not saturate the drive.

SATA 6Gb/s interface

The drive connects through a standard SATA 6Gb/s link, which determines the maximum sequential bandwidth available to the host. Seek time is specified at .1 ms, reflecting the solid-state media. Physical dimensions are 2.5 inch width, .38 inch height, and 2.75 inch depth at 100g weight. Compatibility depends on the server backplane supporting SATA signalling and the Quick-Release carrier.

נקודות עיקריות

  • 800 GB capacity stores large server datasets
  • SATA 6 Gb/s interface connects to standard controllers
  • MLC memory balances endurance and value for enterprise workloads
  • 5 inch quick-release form factor fits hot-swap bays
  • 1 ms seek time accelerates random read performance

מפרט טכני

BrandHP
Form Factor2.5"
Memory ComponentsMLC
InterfaceSATA
Seek Time0.1 ms
Height0.38"
Width3.45"
Depth2.75"
Weight100g
משקל משלוח0.68 kg
מידות האריזה102 × 71 × 15 mm

שאלות על הפריט הזה

Will the 718192-B21 800GB drive work in a server that only has 3 Gb/s SATA ports?

Yes, the SATA 6 Gb/s interface is backward compatible with 3 Gb/s ports, so the drive will operate at the slower link speed without any configuration changes.

How can I verify the 718192-B21 is performing at its rated 0.1 ms seek time after installation?

Run a standard I/O benchmark such as fio or CrystalDiskMark; sustained random read latency should sit around 0.1 ms if the drive and controller are healthy.

Does the 718192-B21 shipment include a drive caddy or mounting screws for a 2.5" bay?

The unit is a bare drive only; caddies, screws or hot-plug trays must be sourced separately to match your specific server chassis.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.