HP
HP 718192-B21 800GB 2.5" SATA enterprise SSD
Refurbished 800GB 2.5" SATA enterprise SSD with MLC memory and 0.1 ms seek time
- Form Factor2.5"
- Memory ComponentsMLC
- InterfaceSATA
- Seek Time0.1 ms
- Height0.38"
- Width3.45"
- 800 GB capacity stores large server datasets
- SATA 6 Gb/s interface connects to standard controllers
- MLC memory balances endurance and value for enterprise workloads
- 5 inch quick-release form factor fits hot-swap bays
- 1 ms seek time accelerates random read performance
HP 800GB SATA enterprise SSD
This refurbished HP 718192-B21 drive provides 800GB of MLC flash storage in a 2.5 inch form factor with a SATA 6Gb/s interface. It is designed for read-intensive server workloads where consistent latency and endurance matter. The Quick-Release carrier simplifies hot-swap installation in compatible HP ProLiant bays. A 90 day warranty covers the factory-original unit.
Suited for capacity refresh in SATA arrays
Administrators replacing failed or undersized SATA SSDs in existing HP Gen8 or Gen9 arrays will find a direct mechanical and electrical match. Buyers needing higher throughput than the SATA bus can deliver should look elsewhere. The MLC memory targets mixed-use profiles rather than write-heavy logging or caching tiers. Systems limited to 3Gb/s backplanes will not saturate the drive.
SATA 6Gb/s interface
The drive connects through a standard SATA 6Gb/s link, which determines the maximum sequential bandwidth available to the host. Seek time is specified at .1 ms, reflecting the solid-state media. Physical dimensions are 2.5 inch width, .38 inch height, and 2.75 inch depth at 100g weight. Compatibility depends on the server backplane supporting SATA signalling and the Quick-Release carrier.
Pluspunten
- 800 GB capacity stores large server datasets
- SATA 6 Gb/s interface connects to standard controllers
- MLC memory balances endurance and value for enterprise workloads
- 5 inch quick-release form factor fits hot-swap bays
- 1 ms seek time accelerates random read performance
Specificaties
| Brand | HP |
|---|---|
| Form Factor | 2.5" |
| Memory Components | MLC |
| Interface | SATA |
| Seek Time | 0.1 ms |
| Height | 0.38" |
| Width | 3.45" |
| Depth | 2.75" |
| Weight | 100g |
| Verzendgewicht | 0.68 kg |
| Pakketafmetingen | 102 × 71 × 15 mm |
Vragen over dit artikel
Will the 718192-B21 800GB drive work in a server that only has 3 Gb/s SATA ports?
Yes, the SATA 6 Gb/s interface is backward compatible with 3 Gb/s ports, so the drive will operate at the slower link speed without any configuration changes.
How can I verify the 718192-B21 is performing at its rated 0.1 ms seek time after installation?
Run a standard I/O benchmark such as fio or CrystalDiskMark; sustained random read latency should sit around 0.1 ms if the drive and controller are healthy.
Does the 718192-B21 shipment include a drive caddy or mounting screws for a 2.5" bay?
The unit is a bare drive only; caddies, screws or hot-plug trays must be sourced separately to match your specific server chassis.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
