אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Silver 2.5 inch SATA SSD with black label, 7mm thick

Intel

Intel D3-S4510 7.68TB enterprise SSD 2.5" Sata

SKU CH-GPQG-82V22

A 7.68 TB Sata enterprise SSD delivering 560 MBps read and 490 MBps write with 1.2 PBW endurance and AES 256-bit encryption

  • Form Factor2.5"
  • Capacity7.68TB
  • Memory Components3D2, TLC
  • InterfaceSATA III
  • Max Sequential ReadUp to 560 MBps
  • Max Sequential WriteUp to 490 MBps

Options 7.68TB

  • 7.68TB
  • 3.84TB
  • 1.92TB
  • 960GB
  • 480GB
  • 240GB

גרסאות עם קו חוצה קיימות, אך אינן במלאי כאן.

  • 68TB capacity fits read-intensive workloads in legacy SATA bays
  • 560MB/s sequential read accelerates data access over HDDs
  • 2,000,000-hour MTBF supports long-term server reliability
  • AES 256-bit hardware encryption secures data at rest
  • Enhanced power loss protection guards writes during unexpected outages

Intel D3-S4510 7.68TB SATA Enterprise SSD

This 2.5-inch solid-state drive uses 3D TLC NAND and a SATA III 6Gb/s interface to deliver 7.68TB of storage for read-intensive server workloads. Sequential reads reach 560 MB/s while writes hit 490 MB/s with latencies of 36 µs and 37 µs respectively. End-to-end data protection, AES 256-bit hardware encryption and enhanced power-loss protection safeguard data integrity. The drive is rated for 1.2 PBW endurance and 2,000,000 hours MTBF.

Suits read-heavy arrays.

This drive targets servers that need high-capacity, low-latency reads within existing SATA backplanes and controllers. It operates at 1.0W idle and 3.0W active across a 0°C to 70°C range with 1000G shock resistance. Buyers who need higher write endurance or a different interface should look at other enterprise SSDs.

7.68TB capacity decides fit

The single specification that determines whether this is the right part is the 7.68TB usable capacity combined with the SATA III interface. If the storage array or server bay requires this exact capacity and a 2.5-inch 7mm SATA form factor, the D3-S4510 matches; otherwise a different drive is required.

נקודות עיקריות

  • 68TB capacity fits read-intensive workloads in legacy SATA bays
  • 560MB/s sequential read accelerates data access over HDDs
  • 2,000,000-hour MTBF supports long-term server reliability
  • AES 256-bit hardware encryption secures data at rest
  • Enhanced power loss protection guards writes during unexpected outages

מפרט טכני

BrandIntel
SeriesD3-S4510
ModelSSDSC2KB480G801
Part NumberSSDSC2KB480G801
Form Factor2.5"
Capacity7.68TB
Memory Components3D2, TLC
InterfaceSATA III
Max Sequential ReadUp to 560 MBps
Max Sequential WriteUp to 490 MBps
Read Latency36 µs
Write Latency37 µs
MTBF2,000,000 hours
FeaturesEndurance Rating (Lifetime Writes) 1.2 PBW
Enhanced Power Loss Data Protection: Yes
Hardware Encryption: AES 256-bit
Temperature Monitoring and Logging: Yes
End-to-End Data Protection: Yes
Compatible with existing SATA setups for an easy storage upgrade
Up to 6x lower power and lower cooling requirements than 2.5-inch HDDs
3.2x more data in the same amount of space
Up to 4.2x lower annualized failure rates (AFR) for fewer drive replacements
Up to 300x more IOPS/TB than HDDs
Power Consumption (Idle)1.0W
Power Consumption (Active)3.0W
Operating Temperature0°C ~ +70°C
Max Shock Resistance1000G / 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS
Non-Operating: 3.13 GRMS
Height7.00mm
Width5.800
Weight0.26

גרסאות נוספות של דגם זה

1 נוספים באותה הסדרה

אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.

שאלות על הפריט הזה

What SATA host interface does the Intel D3-S4510 7.68TB drive require for full 560 MBps read performance?

The drive uses a SATA III 6Gb/s interface. Connect it to a SATA 6Gb/s port on the motherboard or RAID controller to achieve the rated 560 MBps sequential read and 490 MBps sequential write speeds.

Can the Intel D3-S4510 7.68TB SSD replace a 3.5" hard drive in a legacy server backplane?

The drive has a 2.5"/7mm form factor. It fits 2.5" hot-swap bays directly; a 3.5" bay needs a 2.5"-to-3.5" adapter bracket. The SATA III 6Gb/s interface works with existing SATA backplanes and controllers.

How can I verify the Intel D3-S4510 7.68TB SSD is operating within specification after installation?

Check SMART attributes for temperature (0–70 °C range), media wear indicator, and power-on hours. Latency should be near 36 µs read and 37 µs write. The drive also logs temperature history and supports end-to-end data protection status reporting.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.