HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
Kingston Technology Corp.
High-performance PCIe 4.0 x4 NVMe internal SSD with graphene aluminium heat spreader delivering up to 7000 MBps read and 6000 MBps write
This internal solid-state drive uses a PCIe 4.0 x4 NVMe interface and a Phison E18 controller with 3D TLC memory. It delivers sequential reads up to 7000 MBps and writes up to 6000 MBps in the compact M.2 2280 form factor. A low-profile graphene aluminum heat spreader is included.
The drive suits enthusiasts and professionals who need sustained throughput for large-file workflows, gaming loads or heavy multitasking. Its 800 TBW endurance rating and 1.8 million-hour MTBF support intensive daily writes. Buyers whose systems only support PCIe 3.0 or lack an M.2 2280 slot should select a different drive.
Compatibility hinges on the host having an M.2 2280 slot wired for PCIe 4.0 x4 NVMe signalling. The drive will negotiate down to PCIe 3.0 speeds if the platform only supports that generation, but peak throughput requires the full 4.0 link. Verify the motherboard or laptop specification before purchase.
| Brand | Kingston |
|---|---|
| Series | KC3000 |
| Model | SKC3000S/1024G |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1024GB |
| Memory Components | 3D TLC |
| Interface | PCIe 4.0 x4 NVMe |
| Protocol | NVMe |
| Controller | Phison E18 |
| Max Sequential Read | Up to 7000 MBps |
| Max Sequential Write | Up to 6000 MBps |
| 4KB Random Read | Up to 900,000 IOPS |
| 4KB Random Write | Up to 1,000,000 IOPS |
| Terabytes Written (TBW) | 800TB |
| MTBF | 1,800,000 hours |
| HeatSink | with HeatSink |
| Features | PCIe 4.0 NVMe high-performance Upgrade with full capacities up to 4096GB Compact M.2 2280 form factor Low profile graphene aluminum heat spreader |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | 0.33W Avg / 2.8W (MAX) Read / 6.3W (MAX) Write |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Vibration Resistance | Operating: 2.17G Peak (7-800Hz) Non-operating: 20G Peak (20-1000Hz) |
| Height | 2.21mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.00g |
The drive uses the M.2 2280 form factor, measuring 80.00 mm long and 22.00 mm wide with an M-key notch for PCIe 4.0 x4 NVMe.
Many builders forget to remove the protective film from the heat spreader before seating the drive, which blocks thermal transfer.
The 800 TBW rating covers the warranty period; replace the drive once SMART reports the media has reached that written-data threshold.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?