Intel DC S3610 SSDSC2BX016T401 1.6TB 2.5" SATA enterprise SSD
- 2.5"
- 1.6TB
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Kingston Technology Corp.
High-performance PCIe 4.0 x4 NVMe internal SSD with graphene aluminium heat spreader delivering up to 7000 MBps read and 6000 MBps write
This internal solid-state drive uses a PCIe 4.0 x4 NVMe interface and a Phison E18 controller with 3D TLC memory. It delivers sequential reads up to 7000 MBps and writes up to 6000 MBps in the compact M.2 2280 form factor. A low-profile graphene aluminum heat spreader is included.
The drive suits enthusiasts and professionals who need sustained throughput for large-file workflows, gaming loads or heavy multitasking. Its 800 TBW endurance rating and 1.8 million-hour MTBF support intensive daily writes. Buyers whose systems only support PCIe 3.0 or lack an M.2 2280 slot should select a different drive.
Compatibility hinges on the host having an M.2 2280 slot wired for PCIe 4.0 x4 NVMe signalling. The drive will negotiate down to PCIe 3.0 speeds if the platform only supports that generation, but peak throughput requires the full 4.0 link. Verify the motherboard or laptop specification before purchase.
| Brand | Kingston |
|---|---|
| Series | KC3000 |
| Model | SKC3000S/1024G |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1024GB |
| Memory Components | 3D TLC |
| Interface | PCIe 4.0 x4 NVMe |
| Protocol | NVMe |
| Controller | Phison E18 |
| Max Sequential Read | Up to 7000 MBps |
| Max Sequential Write | Up to 6000 MBps |
| 4KB Random Read | Up to 900,000 IOPS |
| 4KB Random Write | Up to 1,000,000 IOPS |
| Terabytes Written (TBW) | 800TB |
| MTBF | 1,800,000 hours |
| HeatSink | with HeatSink |
| Features | PCIe 4.0 NVMe high-performance Upgrade with full capacities up to 4096GB Compact M.2 2280 form factor Low profile graphene aluminum heat spreader |
| Power Consumption (Idle) | 5 mW |
| Power Consumption (Active) | 0.33W Avg / 2.8W (MAX) Read / 6.3W (MAX) Write |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Vibration Resistance | Operating: 2.17G Peak (7-800Hz) Non-operating: 20G Peak (20-1000Hz) |
| Height | 2.21mm |
| Width | 22.00mm |
| Depth | 80.00mm |
| Weight | 7.00g |
The drive uses the M.2 2280 form factor, measuring 80.00 mm long and 22.00 mm wide with an M-key notch for PCIe 4.0 x4 NVMe.
Many builders forget to remove the protective film from the heat spreader before seating the drive, which blocks thermal transfer.
The 800 TBW rating covers the warranty period; replace the drive once SMART reports the media has reached that written-data threshold.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?