אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Small rectangular 2.9inch e-paper HAT with 40-pin header and touch layer

LORDWORLD

LORDWORLD 2.9inch Touch E-Paper HAT 296×128 40PIN

SKU CH-BK77-8ZBYN

A 2.9 inch capacitive touch e-paper display with 296×128 resolution, 5-point touch, and a 40-pin header for Raspberry Pi boards

  • 9 inch capacitive touch ePaper with 296×128 resolution
  • 5-point touch support plus user-defined wakeup gesture
  • No backlight retains last image after power loss
  • Ultra-low power draw only during screen refresh
  • Standard 40-pin GPIO header fits Raspberry Pi boards

Compact 2.9inch ePaper HAT for Raspberry Pi

This 2.9inch capacitive touch ePaper HAT adds a 296×128 pixel display to Raspberry Pi series boards through the standard 40PIN GPIO header. It draws power only during refresh cycles and retains the last image without any backlight when the supply is removed. The module includes development resources and manual examples for Raspberry Pi.

Makers wanting ultra-low-power touch display

Suits developers building battery-powered IoT edge devices, shelf labels or portable instruments that need persistent visual output with minimal energy use. Not for projects requiring video-rate animation, full-colour graphics or continuous backlit viewing.

Check 40PIN GPIO availability and SPI wiring

Verify that your Raspberry Pi board exposes the full 40PIN header and that the SPI interface is free for the display. The reversed control interface also allows connection to Arduino or STM32 boards, so confirm pin mapping matches your chosen controller before ordering.

נקודות עיקריות

  • 9 inch capacitive touch ePaper with 296×128 resolution
  • 5-point touch support plus user-defined wakeup gesture
  • No backlight retains last image after power loss
  • Ultra-low power draw only during screen refresh
  • Standard 40-pin GPIO header fits Raspberry Pi boards

מפרט טכני

BrandLORDWORLD

שאלות על הפריט הזה

Which Raspberry Pi boards will this 40PIN HAT fit directly?

The standard 40PIN GPIO extension header fits any Raspberry Pi series board that exposes the full 40-pin header.

Can the SPI interface on this 296×128 display share the bus with other SPI devices I already use?

Yes, the SPI control interface allows multiple devices on the same bus as long as each has its own chip-select line.

How can I verify the 5-point capacitive touch is working after I install the provided Raspberry Pi examples?

Run the included touch demo; it reports the coordinates of up to five simultaneous touch points on the 2.9 inch panel.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.