暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Small rectangular 2.9inch e-paper HAT with 40-pin header and touch layer

LORDWORLD

LORDWORLD 2.9inch Touch E-Paper HAT 296×128 40PIN

SKU CH-BK77-8ZBYN

A 2.9 inch capacitive touch e-paper display with 296×128 resolution, 5-point touch, and a 40-pin header for Raspberry Pi boards

  • 9 inch capacitive touch ePaper with 296×128 resolution
  • 5-point touch support plus user-defined wakeup gesture
  • No backlight retains last image after power loss
  • Ultra-low power draw only during screen refresh
  • Standard 40-pin GPIO header fits Raspberry Pi boards

Compact 2.9inch ePaper HAT for Raspberry Pi

This 2.9inch capacitive touch ePaper HAT adds a 296×128 pixel display to Raspberry Pi series boards through the standard 40PIN GPIO header. It draws power only during refresh cycles and retains the last image without any backlight when the supply is removed. The module includes development resources and manual examples for Raspberry Pi.

Makers wanting ultra-low-power touch display

Suits developers building battery-powered IoT edge devices, shelf labels or portable instruments that need persistent visual output with minimal energy use. Not for projects requiring video-rate animation, full-colour graphics or continuous backlit viewing.

Check 40PIN GPIO availability and SPI wiring

Verify that your Raspberry Pi board exposes the full 40PIN header and that the SPI interface is free for the display. The reversed control interface also allows connection to Arduino or STM32 boards, so confirm pin mapping matches your chosen controller before ordering.

特長

  • 9 inch capacitive touch ePaper with 296×128 resolution
  • 5-point touch support plus user-defined wakeup gesture
  • No backlight retains last image after power loss
  • Ultra-low power draw only during screen refresh
  • Standard 40-pin GPIO header fits Raspberry Pi boards

仕様

BrandLORDWORLD

この商品に関する質問

Which Raspberry Pi boards will this 40PIN HAT fit directly?

The standard 40PIN GPIO extension header fits any Raspberry Pi series board that exposes the full 40-pin header.

Can the SPI interface on this 296×128 display share the bus with other SPI devices I already use?

Yes, the SPI control interface allows multiple devices on the same bus as long as each has its own chip-select line.

How can I verify the 5-point capacitive touch is working after I install the provided Raspberry Pi examples?

Run the included touch demo; it reports the coordinates of up to five simultaneous touch points on the 2.9 inch panel.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。