אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Clear acrylic stackable case with 40mm fan and heatsinks for Raspberry Pi boards

Micro Connectors

Micro Connectors RAS-PCS06 Acrylic Stackable Case with Fan for Raspberry Pi 5, 4, 3, Zero, Tinkerboard

SKU CH-Y69B-TVG8N MPN RAS-PCS06

Stackable acrylic case with 40mm fan and heatsinks cools Raspberry Pi boards and enables cluster builds

  • FeaturesCompatible with Raspberry Pi 5, Pi 4 Model B, Pi 3 Model A+/
  • Dimensions (W x L)3.58" x 2.74" x 1.37"
  • Package ContentsAcrylic case, fan, heatsinks x 3, footpads, screws, standoff
  • Active 40 mm fan at 5000 RPM with three heatsinks cools CPU and chipset
  • Stackable acrylic frame lets you build compact Pi clusters
  • Open design keeps GPIO, camera CSI and display DSI accessible
  • Compatible with Raspberry Pi 5, 4, 3, 2, 1, Zero and Zero 2 W plus Asus Tinkerboard
  • Supports Raspberry Pi PoE HAT and includes wall-mount option

Acrylic Stackable Case with 40mm Fan

The Micro Connectors RAS-PCS06 is a precision laser-cut acrylic enclosure designed for Raspberry Pi 5, 4, 3, 2, 1, Zero variants and Asus Tinkerboard. It includes an active 40mm fan, three heatsinks and all mounting hardware. The open frame keeps the 40-pin GPIO, CSI and DSI ports fully accessible for rapid prototyping or permanent deployment.

5000 RPM Active Cooling and Cluster Ready

A 5V 40mm fan spinning at 5000 RPM mounts directly over the CPU area while three adhesive heatsinks draw heat from the main chips. The stackable architecture uses 2.54mm standoffs so multiple units align vertically, letting builders expand a Pi cluster without redesigning the mechanical layout. Wall-mount tabs are moulded into the acrylic for fixed installations.

Upgrade from Basic Shells When Heat or Scale Matters

Builders moving up from bare boards or passive shells gain forced-air cooling that prevents thermal throttling under sustained loads. The PoE HAT cutout means power-over-Ethernet upgrades slot in without case modification. Buyers who need a fully sealed dust-proof enclosure or integrated display mounting will need a different form factor.

נקודות עיקריות

  • Active 40 mm fan at 5000 RPM with three heatsinks cools CPU and chipset
  • Stackable acrylic frame lets you build compact Pi clusters
  • Open design keeps GPIO, camera CSI and display DSI accessible
  • Compatible with Raspberry Pi 5, 4, 3, 2, 1, Zero and Zero 2 W plus Asus Tinkerboard
  • Supports Raspberry Pi PoE HAT and includes wall-mount option

מפרט טכני

BrandMicro Connectors
ModelRAS-PCS06
FeaturesCompatible with Raspberry Pi 5, Pi 4 Model B, Pi 3 Model A+/B/B+, Pi 2 Model B, Pi 1 Model B, Pi Zero/Zero W and Pi Zero 2 W, Asus Tinkerboard / Tinkerboard S.
Supports the installation of Raspberry Pi PoE HAT.
Active 40mm fan and heatsinks included to cool CPU and chipset.
Stackable design for Pi Clusters.
Open design for easy access to 40-pin GPIO, camera CSI, and display DSI.
Wall mount compatible
Specifications:
Compatible version: Raspberry Pi 5, Pi 4 Model B, Pi 3 Model A+/B/B+, Pi 2 Model B, Pi 1 Model B, Pi Zero/Zero W and Pi Zero 2 W, Asus Tinkerboard/Tinkerboard S
Material:
Dimensions (W x L)3.58" x 2.74" x 1.37"
Package ContentsAcrylic case, fan, heatsinks x 3, footpads, screws, standoffs and screw driver.
משקל משלוח0.09 kg
מידות האריזה126 × 77 × 22 mm

שאלות על הפריט הזה

Will this case fit my Raspberry Pi 5 and Pi 4 side by side in a stack?

The stackable design supports Pi 5, Pi 4, Pi 3, Pi 2, Pi 1, Zero models and Asus Tinkerboard, so you can build a mixed cluster using the same case.

How do I confirm the 40 mm fan is running at its rated 5000 RPM after assembly?

Connect the fan to the 2.54 mm pin header at 5 V; the fan will spin at 5000 RPM when the board powers on, providing active cooling for the CPU and chipset.

Does the package include everything needed to mount a Pi Zero 2 W, or must I buy extra standoffs?

The box contains the acrylic case, 40 mm fan, three heatsinks, footpads, screws, standoffs and a screwdriver — all hardware required for Pi Zero 2 W installation is included.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.