暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Clear acrylic stackable case with 40mm fan and heatsinks for Raspberry Pi boards

Micro Connectors

Micro Connectors RAS-PCS06 Acrylic Stackable Case with Fan for Raspberry Pi 5, 4, 3, Zero, Tinkerboard

SKU CH-Y69B-TVG8N MPN RAS-PCS06

Stackable acrylic case with 40mm fan and heatsinks cools Raspberry Pi boards and enables cluster builds

  • FeaturesCompatible with Raspberry Pi 5, Pi 4 Model B, Pi 3 Model A+/
  • Dimensions (W x L)3.58" x 2.74" x 1.37"
  • Package ContentsAcrylic case, fan, heatsinks x 3, footpads, screws, standoff
  • Active 40 mm fan at 5000 RPM with three heatsinks cools CPU and chipset
  • Stackable acrylic frame lets you build compact Pi clusters
  • Open design keeps GPIO, camera CSI and display DSI accessible
  • Compatible with Raspberry Pi 5, 4, 3, 2, 1, Zero and Zero 2 W plus Asus Tinkerboard
  • Supports Raspberry Pi PoE HAT and includes wall-mount option

Acrylic Stackable Case with 40mm Fan

The Micro Connectors RAS-PCS06 is a precision laser-cut acrylic enclosure designed for Raspberry Pi 5, 4, 3, 2, 1, Zero variants and Asus Tinkerboard. It includes an active 40mm fan, three heatsinks and all mounting hardware. The open frame keeps the 40-pin GPIO, CSI and DSI ports fully accessible for rapid prototyping or permanent deployment.

5000 RPM Active Cooling and Cluster Ready

A 5V 40mm fan spinning at 5000 RPM mounts directly over the CPU area while three adhesive heatsinks draw heat from the main chips. The stackable architecture uses 2.54mm standoffs so multiple units align vertically, letting builders expand a Pi cluster without redesigning the mechanical layout. Wall-mount tabs are moulded into the acrylic for fixed installations.

Upgrade from Basic Shells When Heat or Scale Matters

Builders moving up from bare boards or passive shells gain forced-air cooling that prevents thermal throttling under sustained loads. The PoE HAT cutout means power-over-Ethernet upgrades slot in without case modification. Buyers who need a fully sealed dust-proof enclosure or integrated display mounting will need a different form factor.

特長

  • Active 40 mm fan at 5000 RPM with three heatsinks cools CPU and chipset
  • Stackable acrylic frame lets you build compact Pi clusters
  • Open design keeps GPIO, camera CSI and display DSI accessible
  • Compatible with Raspberry Pi 5, 4, 3, 2, 1, Zero and Zero 2 W plus Asus Tinkerboard
  • Supports Raspberry Pi PoE HAT and includes wall-mount option

仕様

BrandMicro Connectors
ModelRAS-PCS06
FeaturesCompatible with Raspberry Pi 5, Pi 4 Model B, Pi 3 Model A+/B/B+, Pi 2 Model B, Pi 1 Model B, Pi Zero/Zero W and Pi Zero 2 W, Asus Tinkerboard / Tinkerboard S.
Supports the installation of Raspberry Pi PoE HAT.
Active 40mm fan and heatsinks included to cool CPU and chipset.
Stackable design for Pi Clusters.
Open design for easy access to 40-pin GPIO, camera CSI, and display DSI.
Wall mount compatible
Specifications:
Compatible version: Raspberry Pi 5, Pi 4 Model B, Pi 3 Model A+/B/B+, Pi 2 Model B, Pi 1 Model B, Pi Zero/Zero W and Pi Zero 2 W, Asus Tinkerboard/Tinkerboard S
Material:
Dimensions (W x L)3.58" x 2.74" x 1.37"
Package ContentsAcrylic case, fan, heatsinks x 3, footpads, screws, standoffs and screw driver.
配送重量0.09 kg
梱包サイズ126 × 77 × 22 mm

この商品に関する質問

Will this case fit my Raspberry Pi 5 and Pi 4 side by side in a stack?

The stackable design supports Pi 5, Pi 4, Pi 3, Pi 2, Pi 1, Zero models and Asus Tinkerboard, so you can build a mixed cluster using the same case.

How do I confirm the 40 mm fan is running at its rated 5000 RPM after assembly?

Connect the fan to the 2.54 mm pin header at 5 V; the fan will spin at 5000 RPM when the board powers on, providing active cooling for the CPU and chipset.

Does the package include everything needed to mount a Pi Zero 2 W, or must I buy extra standoffs?

The box contains the acrylic case, 40 mm fan, three heatsinks, footpads, screws, standoffs and a screwdriver — all hardware required for Pi Zero 2 W installation is included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。