אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Rectangular metal power supply unit, matte finish, screw terminals visible, 24V 2.1A label

myVolts

myVolts S-50-24 24V 2.1A 50.4W power supply

SKU CH-A2EF-8Q49W MPN S-50-24

Delivers 24V at 2.1A with selectable 85–264VAC input and ±10% voltage adjustment

  • TypeAT
  • Stable 24 V output with ±1 % regulation
  • 4 W continuous power at 86 % efficiency
  • Wide AC input 85–264 V selectable by switch
  • Low 200 mV ripple for clean DC supply
  • Compact lightweight design suits industrial control panels

Industrial DC Power Supply

The myVolts S-50-24 is a 24V switching power supply built for industrial environments such as PLC control systems and transportation facilities. It delivers a regulated DC output with ±1% voltage accuracy and 86% efficiency. Simple wiring and a compact, lightweight design allow quick integration into control cabinets or machinery frames.

50.4W capacity with 2.1A continuous output

Rated output current reaches 2.1A across a 0-2.1A range, providing 50.4W of DC power for sensors, actuators and logic modules. Load and line regulation are each held within ±0.5%, while ripple and noise stay at 200mVp-p. The adjustable voltage range of ±10% adds headroom for fine-tuning, though the unit cannot supply current beyond the 2.1A limit.

Selectable AC input range 85-264VAC

A built-in switch selects between 85-132VAC and 170-264VAC inputs at 47-63Hz, with a 240-370VDC option also supported. Input current draws 1.1A at 115VAC or 0.65A at 230VAC, and cold-start inrush reaches 45A at 230V. Leakage current remains below 2mA at 240VAC, meeting basic safety requirements for industrial installations.

נקודות עיקריות

  • Stable 24 V output with ±1 % regulation
  • 4 W continuous power at 86 % efficiency
  • Wide AC input 85–264 V selectable by switch
  • Low 200 mV ripple for clean DC supply
  • Compact lightweight design suits industrial control panels

מפרט טכני

TypeAT

שאלות על הפריט הזה

Can I run this 24 V, 2.1 A supply alongside my older 24 V gear on the same bench?

Yes, the unit delivers 24 V at up to 2.1 A with ±1 % voltage accuracy and 200 mVp-p ripple, matching typical 24 V industrial equipment requirements.

How can I verify the S-50-24 is working correctly after wiring it up?

Measure the output with a multimeter; you should see 24 V ±1 % under load, and the built-in voltage-adjust potentiometer lets you trim within ±10 % if needed.

What comes in the box and what must I source separately?

The supply itself is included; you will need to provide an AC mains cable suited to your local plug and the DC output wiring or connectors for your load.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.