BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 $
0.00279458BTC
במלאי
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 SODIMM Kit for POSIFLEX XT-6315E JIVA
16 GB DDR4 2400 CL17 SODIMM kit with two 8 GB modules for the POSIFLEX XT-6315E JIVA terminal
- Capacity16GB (2 x 8GB)
- SpeedDDR4 2400 (PC4 19200)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16GB dual-channel kit boosts multitasking on POSIFLEX XT-6315E JIVA
- DDR4 2400 CL17 speed handles transaction workloads smoothly
- 2V low voltage reduces power draw in fanless terminal
- 260-pin SODIMM form factor fits the POSIFLEX slot exactly
- Tested with Samsung Micron Hynix chips for rock-solid reliability
POSIFLEX XT-6315E JIVA 16 GB kit
This 16 GB kit contains two 8 GB DDR4 2400 SODIMM modules built for the POSIFLEX XT-6315E JIVA fanless POS terminal. It delivers 16 GB of total capacity at PC4-19200 speed with CL17 latency. The modules run at 1.2 V and use a 260-pin unbuffered non-ECC design. Major OEM chips from Samsung, Micron or Hynix are used throughout.
Check your terminal before ordering
Verify that the XT-6315E JIVA currently uses DDR4 SODIMM slots and supports 2400 MHz operation at 1.2 V. Confirm the motherboard accepts 2Rx8 dual-rank modules and does not require ECC or registered memory. Ensure both SO-DIMM sockets are free or that you can remove existing sticks to install the pair. Consult the system manual for the exact slot population rules.
Upgrade from lower capacity or speed
This kit replaces smaller DDR4 SODIMM sets or slower modules that limit multitasking in a retail or kiosk environment. The jump is worth it when the terminal runs multiple POS applications, drives dual displays or processes local databases that exceed the current memory footprint. It also restores full dual-channel bandwidth if only a single module was installed previously.
נקודות עיקריות
- 16GB dual-channel kit boosts multitasking on POSIFLEX XT-6315E JIVA
- DDR4 2400 CL17 speed handles transaction workloads smoothly
- 2V low voltage reduces power draw in fanless terminal
- 260-pin SODIMM form factor fits the POSIFLEX slot exactly
- Tested with Samsung Micron Hynix chips for rock-solid reliability
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS19200-828K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 2400 (PC4 19200) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL17 |
| Heat Spreader | No |
| Type | 260-PIN DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT |
שאלות על הפריט הזה
Does the POSIFLEX XT-6315E JIVA kit include both 8 GB modules or must I buy a second stick?
The package supplies two 8 GB SODIMMs for a total of 16 GB, so no extra modules are required.
Should I pick the CL17 2400 MHz version or a lower-latency alternative for this terminal?
The XT-6315E JIVA is validated for DDR4 2400 CL17 1.20 V 2Rx8 modules; this kit matches that exact specification.
Will the 2400 MHz rating actually run at 2400 MHz once installed in the POSIFLEX?
The terminal's memory controller sets the speed; with these 260-pin DDR4 2400 CL17 sticks it will operate at the rated 2400 MHz.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
