我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green circuit boards with gold edge connectors and black memory chips

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 SODIMM Kit for POSIFLEX XT-6315E JIVA

SKU CH-PF42-W2ZQV

16 GB DDR4 2400 CL17 SODIMM kit with two 8 GB modules for the POSIFLEX XT-6315E JIVA terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB dual-channel kit boosts multitasking on POSIFLEX XT-6315E JIVA
  • DDR4 2400 CL17 speed handles transaction workloads smoothly
  • 2V low voltage reduces power draw in fanless terminal
  • 260-pin SODIMM form factor fits the POSIFLEX slot exactly
  • Tested with Samsung Micron Hynix chips for rock-solid reliability

POSIFLEX XT-6315E JIVA 16 GB kit

This 16 GB kit contains two 8 GB DDR4 2400 SODIMM modules built for the POSIFLEX XT-6315E JIVA fanless POS terminal. It delivers 16 GB of total capacity at PC4-19200 speed with CL17 latency. The modules run at 1.2 V and use a 260-pin unbuffered non-ECC design. Major OEM chips from Samsung, Micron or Hynix are used throughout.

Check your terminal before ordering

Verify that the XT-6315E JIVA currently uses DDR4 SODIMM slots and supports 2400 MHz operation at 1.2 V. Confirm the motherboard accepts 2Rx8 dual-rank modules and does not require ECC or registered memory. Ensure both SO-DIMM sockets are free or that you can remove existing sticks to install the pair. Consult the system manual for the exact slot population rules.

Upgrade from lower capacity or speed

This kit replaces smaller DDR4 SODIMM sets or slower modules that limit multitasking in a retail or kiosk environment. The jump is worth it when the terminal runs multiple POS applications, drives dual displays or processes local databases that exceed the current memory footprint. It also restores full dual-channel bandwidth if only a single module was installed previously.

商品特色

  • 16GB dual-channel kit boosts multitasking on POSIFLEX XT-6315E JIVA
  • DDR4 2400 CL17 speed handles transaction workloads smoothly
  • 2V low voltage reduces power draw in fanless terminal
  • 260-pin SODIMM form factor fits the POSIFLEX slot exactly
  • Tested with Samsung Micron Hynix chips for rock-solid reliability

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT

商品問答

Does the POSIFLEX XT-6315E JIVA kit include both 8 GB modules or must I buy a second stick?

The package supplies two 8 GB SODIMMs for a total of 16 GB, so no extra modules are required.

Should I pick the CL17 2400 MHz version or a lower-latency alternative for this terminal?

The XT-6315E JIVA is validated for DDR4 2400 CL17 1.20 V 2Rx8 modules; this kit matches that exact specification.

Will the 2400 MHz rating actually run at 2400 MHz once installed in the POSIFLEX?

The terminal's memory controller sets the speed; with these 260-pin DDR4 2400 CL17 sticks it will operate at the rated 2400 MHz.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。