אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 SODIMM Kit for POSIFLEX XT-6515 JIVA

SKU CH-0WS1-ED45D

A 16 GB dual-channel DDR4 SODIMM kit running at 2400 MHz with CL17 latency and 1.2 V operation, built for the POSIFLEX XT-6515 JIVA terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit boosts multitasking on POSIFLEX XT-6515 JIVA
  • DDR4 2400 speed matches system bus for stable throughput
  • CL17 latency keeps response tight during transactions
  • 2 V low voltage reduces heat in fanless chassis
  • 260-pin SODIMM form factor fits the terminal slot exactly

System-Specific DDR4 Kit

This 16GB (2 x 8GB) DDR4 2400 SODIMM kit is built for the POSIFLEX XT-6515 JIVA terminal. It uses unbuffered, non-ECC modules at 1.20V to match the platform's requirements. The 260-pin form factor fits the system's memory slots directly without adapters.

Sustained Load Stability

Each module is stress tested under load to verify reliable operation during continuous point-of-sale workloads. The CL17 latency and 2Rx8 organisation support steady throughput for transaction processing. Major OEM chips from Samsung, Micron or Hynix provide consistent signal integrity over long shifts.

No-Spreader Design

The modules ship without heat spreaders, keeping the slim profile required by the fanless chassis. Standard 260-pin SODIMM connectors allow straightforward installation by in-house IT staff. The kit delivers 16GB total capacity for environments that need more headroom than the base configuration.

נקודות עיקריות

  • 16 GB kit boosts multitasking on POSIFLEX XT-6515 JIVA
  • DDR4 2400 speed matches system bus for stable throughput
  • CL17 latency keeps response tight during transactions
  • 2 V low voltage reduces heat in fanless chassis
  • 260-pin SODIMM form factor fits the terminal slot exactly

מפרט טכני

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT

שאלות על הפריט הזה

How much heat or power does the 1.2 V DDR4 2400 kit draw when the POS terminal runs all day?

Each module operates at 1.2 V without a heat spreader, so typical power draw stays low and passive cooling inside the fanless POSIFLEX XT-6515 JIVA is sufficient for continuous use.

What must the POSIFLEX XT-6515 JIVA already have for this 260-pin SODIMM kit to work?

The terminal needs two free DDR4 SODIMM slots that accept 2Rx8 unbuffered non-ECC modules at PC4-19200 speed.

Will the CL17 2Rx8 modules run alongside any original memory still installed in the POSIFLEX XT-6515 JIVA?

Yes, if the existing sticks are also DDR4 2400 non-ECC unbuffered SODIMMs; the system will clock all modules to the slowest common timing.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.