我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR4 SODIMM modules with gold contacts and black chips side by side

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 SODIMM Kit for POSIFLEX XT-6515 JIVA

SKU CH-0WS1-ED45D

A 16 GB dual-channel DDR4 SODIMM kit running at 2400 MHz with CL17 latency and 1.2 V operation, built for the POSIFLEX XT-6515 JIVA terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit boosts multitasking on POSIFLEX XT-6515 JIVA
  • DDR4 2400 speed matches system bus for stable throughput
  • CL17 latency keeps response tight during transactions
  • 2 V low voltage reduces heat in fanless chassis
  • 260-pin SODIMM form factor fits the terminal slot exactly

System-Specific DDR4 Kit

This 16GB (2 x 8GB) DDR4 2400 SODIMM kit is built for the POSIFLEX XT-6515 JIVA terminal. It uses unbuffered, non-ECC modules at 1.20V to match the platform's requirements. The 260-pin form factor fits the system's memory slots directly without adapters.

Sustained Load Stability

Each module is stress tested under load to verify reliable operation during continuous point-of-sale workloads. The CL17 latency and 2Rx8 organisation support steady throughput for transaction processing. Major OEM chips from Samsung, Micron or Hynix provide consistent signal integrity over long shifts.

No-Spreader Design

The modules ship without heat spreaders, keeping the slim profile required by the fanless chassis. Standard 260-pin SODIMM connectors allow straightforward installation by in-house IT staff. The kit delivers 16GB total capacity for environments that need more headroom than the base configuration.

商品特色

  • 16 GB kit boosts multitasking on POSIFLEX XT-6515 JIVA
  • DDR4 2400 speed matches system bus for stable throughput
  • CL17 latency keeps response tight during transactions
  • 2 V low voltage reduces heat in fanless chassis
  • 260-pin SODIMM form factor fits the terminal slot exactly

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT

商品問答

How much heat or power does the 1.2 V DDR4 2400 kit draw when the POS terminal runs all day?

Each module operates at 1.2 V without a heat spreader, so typical power draw stays low and passive cooling inside the fanless POSIFLEX XT-6515 JIVA is sufficient for continuous use.

What must the POSIFLEX XT-6515 JIVA already have for this 260-pin SODIMM kit to work?

The terminal needs two free DDR4 SODIMM slots that accept 2Rx8 unbuffered non-ECC modules at PC4-19200 speed.

Will the CL17 2Rx8 modules run alongside any original memory still installed in the POSIFLEX XT-6515 JIVA?

Yes, if the existing sticks are also DDR4 2400 non-ECC unbuffered SODIMMs; the system will clock all modules to the slowest common timing.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。