NEMIX RAM 16GB 2x8GB DDR5 5600 CL46 UDIMM Kit Supermicro X14SAZ-F
- 16GB (2 x 8GB)
- 288-Pin DDR5 UDIMM
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
NEMIX RAM
16GB DDR5 5600MHz CL46 1.1V UDIMM built for Supermicro X14SAZ-F motherboards
Size 16GB
This 16 GB DDR5 5600 module matches the exact rank, voltage and timing the Supermicro X14SAZ-F memory controller expects. It installs as a single 288-pin UDIMM and runs at the rated 5600 MT/s without manual tuning.
The stick uses Samsung, Micron or Hynix components on a standard 288-pin unbuffered PCB with no heat spreader. That layout fits the board's DIMM slots and population rules directly, so the system recognises the full capacity at first boot.
Rated at 1.10 V with CL46 latency, the module draws minimal power while maintaining stability at 5600 MT/s. The absence of a spreader keeps the profile slim for tight chassis clearance, and the low voltage limits heat output during sustained workloads.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
This module is rated DDR5 5600, which corresponds to PC5-44800. The memory controller will recognise it at that data rate and the CL46 timing.
Yes. The board requires a 288-pin unbuffered UDIMM, and this stick matches that form factor exactly. It is not an ECC or registered module, so it seats in the standard desktop DIMM slots.
Power off the system and open the case. Align the notch on the module with the slot key, press down firmly until both side clips snap shut. The step many miss is checking the motherboard manual for the correct DIMM population order before inserting the stick.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?