暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, 288 gold pins, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 1Rx8 1.1V UDIMM Supermicro X14SAZ-F memory upgrade

SKU CH-8E7J-5XAXG

16GB DDR5 5600MHz CL46 1.1V UDIMM built for Supermicro X14SAZ-F motherboards

  • Capacity16GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB

  • Exact match for Supermicro X14SAZ-F ensures full 16 GB recognition at rated speed
  • 5600 MHz DDR5 with CL46 timing delivers responsive throughput for everyday workloads
  • 1 V operation keeps power draw low while maintaining stability
  • Built from Samsung Micron or Hynix chips tested at rated specifications
  • 288-pin UDIMM form factor fits the board's memory slots without adapters

Precise 16 GB DDR5 upgrade for Supermicro X14SAZ-F

This 16 GB DDR5 5600 module matches the exact rank, voltage and timing the Supermicro X14SAZ-F memory controller expects. It installs as a single 288-pin UDIMM and runs at the rated 5600 MT/s without manual tuning.

Unbuffered UDIMM form factor with major OEM chips

The stick uses Samsung, Micron or Hynix components on a standard 288-pin unbuffered PCB with no heat spreader. That layout fits the board's DIMM slots and population rules directly, so the system recognises the full capacity at first boot.

Low-voltage DDR5 operation at 1.10 V CL46

Rated at 1.10 V with CL46 latency, the module draws minimal power while maintaining stability at 5600 MT/s. The absence of a spreader keeps the profile slim for tight chassis clearance, and the low voltage limits heat output during sustained workloads.

特長

  • Exact match for Supermicro X14SAZ-F ensures full 16 GB recognition at rated speed
  • 5600 MHz DDR5 with CL46 timing delivers responsive throughput for everyday workloads
  • 1 V operation keeps power draw low while maintaining stability
  • Built from Samsung Micron or Hynix chips tested at rated specifications
  • 288-pin UDIMM form factor fits the board's memory slots without adapters

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K1
Capacity16GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What DDR5 speed and PC5 rating does this 16 GB module run at?

This module is rated DDR5 5600, which corresponds to PC5-44800. The memory controller will recognise it at that data rate and the CL46 timing.

Will this 288-pin UDIMM fit the Supermicro X14SAZ-F motherboard slots?

Yes. The board requires a 288-pin unbuffered UDIMM, and this stick matches that form factor exactly. It is not an ECC or registered module, so it seats in the standard desktop DIMM slots.

How do I install the module, and what step do people often miss?

Power off the system and open the case. Align the notch on the module with the slot key, press down firmly until both side clips snap shut. The step many miss is checking the motherboard manual for the correct DIMM population order before inserting the stick.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。