SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 $
0.00501972BTC
במלאי
NEMIX RAM
NEMIX RAM 192GB (2x96GB) DDR5 5600 CL46 ECC RDIMM memory upgrade
A 192 GB DDR5 5600 CL46 ECC registered dual-rank kit built for Supermicro server motherboards
- Capacity192GB (2 x 96GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 192 GB total capacity for memory-intensive server workloads using 2 x 96 GB modules
- DDR5 5600 speed with PC5-44800 bandwidth for high-throughput data processing
- ECC registered RDIMM design detects and corrects errors to protect mission-critical data
- 1 V operating voltage reduces power draw in dense Supermicro server deployments
- 2Rx4 dual-rank organisation on 288-pin DDR5 RDIMM form factor for broad compatibility
192GB DDR5 ECC RDIMM kit
This 192GB kit contains two 96GB registered DDR5 modules built for SuperMicro B13SEG motherboards. It targets administrators expanding memory capacity in enterprise servers or workstations that require error-correcting registered DIMMs. Each module operates at 1.1V with CL46 latency and a 2Rx4 rank configuration.
Sustained load behaviour
Modules are stress tested under load to verify stability during continuous enterprise workloads such as virtualisation, database serving and AI training tasks. Registered buffering and on-die ECC maintain data integrity across extended duty cycles without the signal degradation sometimes seen in unbuffered alternatives. The 5600 MT/s rating delivers consistent throughput for memory-bound server applications.
Pre-order compatibility check
Confirm that your SuperMicro B13SEG platform supports 96GB density RDIMMs at DDR5 5600 and that the BIOS revision recognises 2Rx4 organisation. Verify available DIMM slots for a two-module population and ensure the memory controller can address the full 192GB capacity. DDR5 modules are keyed differently from earlier generations and will not fit non-DDR5 sockets.
נקודות עיקריות
- 192 GB total capacity for memory-intensive server workloads using 2 x 96 GB modules
- DDR5 5600 speed with PC5-44800 bandwidth for high-throughput data processing
- ECC registered RDIMM design detects and corrects errors to protect mission-critical data
- 1 V operating voltage reduces power draw in dense Supermicro server deployments
- 2Rx4 dual-rank organisation on 288-pin DDR5 RDIMM form factor for broad compatibility
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K2 |
| Capacity | 192GB (2 x 96GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 192GB (2X96GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT |
שאלות על הפריט הזה
How much power does the 192GB DDR5 5600 kit draw at its 1.10V operating voltage?
Each module runs at 1.10V, the standard DDR5 voltage for registered DIMMs; total system power depends on the server platform and workload.
What motherboard slot and chipset support are required to install these 288-pin RDIMMs?
They need a Supermicro motherboard with DDR5 RDIMM slots and a chipset that supports 5600 MT/s registered ECC memory.
Will the CL46 5600 modules run stably alongside existing 4800 MT/s DDR5 RDIMMs in the same server?
The memory controller will down-clock all modules to the lowest common speed, so 4800 MT/s RDIMMs and these 5600 MT/s modules can operate together at 4800 MT/s.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
