Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two green DDR5 RDIMM sticks, bare chips, no heat spreader

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 5600 CL46 ECC RDIMM memory upgrade

SKU CH-ANPS-NKSDF

A 192 GB DDR5 5600 CL46 ECC registered dual-rank kit built for Supermicro server motherboards

  • Capacity192GB (2 x 96GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 192 GB total capacity for memory-intensive server workloads using 2 x 96 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth for high-throughput data processing
  • ECC registered RDIMM design detects and corrects errors to protect mission-critical data
  • 1 V operating voltage reduces power draw in dense Supermicro server deployments
  • 2Rx4 dual-rank organisation on 288-pin DDR5 RDIMM form factor for broad compatibility

192GB DDR5 ECC RDIMM kit

This 192GB kit contains two 96GB registered DDR5 modules built for SuperMicro B13SEG motherboards. It targets administrators expanding memory capacity in enterprise servers or workstations that require error-correcting registered DIMMs. Each module operates at 1.1V with CL46 latency and a 2Rx4 rank configuration.

Sustained load behaviour

Modules are stress tested under load to verify stability during continuous enterprise workloads such as virtualisation, database serving and AI training tasks. Registered buffering and on-die ECC maintain data integrity across extended duty cycles without the signal degradation sometimes seen in unbuffered alternatives. The 5600 MT/s rating delivers consistent throughput for memory-bound server applications.

Pre-order compatibility check

Confirm that your SuperMicro B13SEG platform supports 96GB density RDIMMs at DDR5 5600 and that the BIOS revision recognises 2Rx4 organisation. Verify available DIMM slots for a two-module population and ensure the memory controller can address the full 192GB capacity. DDR5 modules are keyed differently from earlier generations and will not fit non-DDR5 sockets.

Najważniejsze cechy

  • 192 GB total capacity for memory-intensive server workloads using 2 x 96 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth for high-throughput data processing
  • ECC registered RDIMM design detects and corrects errors to protect mission-critical data
  • 1 V operating voltage reduces power draw in dense Supermicro server deployments
  • 2Rx4 dual-rank organisation on 288-pin DDR5 RDIMM form factor for broad compatibility

Specyfikacja

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content192GB (2X96GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory KIT

Pytania dotyczące tego produktu

How much power does the 192GB DDR5 5600 kit draw at its 1.10V operating voltage?

Each module runs at 1.10V, the standard DDR5 voltage for registered DIMMs; total system power depends on the server platform and workload.

What motherboard slot and chipset support are required to install these 288-pin RDIMMs?

They need a Supermicro motherboard with DDR5 RDIMM slots and a chipset that supports 5600 MT/s registered ECC memory.

Will the CL46 5600 modules run stably alongside existing 4800 MT/s DDR5 RDIMMs in the same server?

The memory controller will down-clock all modules to the lowest common speed, so 4800 MT/s RDIMMs and these 5600 MT/s modules can operate together at 4800 MT/s.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.