BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 $
0.00277496BTC
במלאי
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX XT-5515Pro memory upgrade
4GB DDR3 1333 SODIMM module built for the POSIFLEX XT-5515Pro point-of-sale terminal
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 4 GB DDR3 1333 boosts POS terminal speed
- 35 V low-voltage SODIMM cuts power draw
- 204-pin CL9 module fits XT-5515Pro exactly
- 2Rx8 unbuffered design ensures stable operation
- Major OEM chips deliver enterprise-grade reliability
4GB DDR3 SODIMM for POSIFLEX XT-5515Pro
This 4GB DDR3 1333MHz module is built for the POSIFLEX XT-5515Pro JIVA fanless POS terminal. It uses a 204-pin SODIMM form factor with 2Rx8 organisation and CL9 latency. The part targets IT teams maintaining or upgrading these specific point-of-sale systems.
Single-module kit simplifies installation
The package contains one 4GB stick, so there is no need to match multiple modules or populate paired slots. Non-ECC unbuffered operation means the memory works with the terminal's standard motherboard without requiring ECC support. A lifetime replacement warranty backs the module after installation.
Low-voltage design suits fanless chassis
Rated at 1.35V with a 1.50V fallback, the module draws minimal power inside the sealed POS enclosure. Major OEM chips from Samsung, Micron or Hynix are stress-tested under load for stability. The lack of a heat spreader keeps the profile thin for tight SODIMM slots.
נקודות עיקריות
- 4 GB DDR3 1333 boosts POS terminal speed
- 35 V low-voltage SODIMM cuts power draw
- 204-pin CL9 module fits XT-5515Pro exactly
- 2Rx8 unbuffered design ensures stable operation
- Major OEM chips deliver enterprise-grade reliability
מפרט טכני
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
שאלות על הפריט הזה
Will the 2Rx8 rank layout on this 4 GB SODIMM ever need a firmware update or chip replacement?
The 2Rx8 DDR3 modules use standard JEDEC chips and have no firmware; they are not field-serviceable, so no firmware updates or chip swaps are required.
What limit appears first when the POSIFLEX XT-5515Pro runs this memory at full load for hours?
The DDR3-1333 CL9 spec and 1.50 V operating voltage set the bandwidth and thermal ceiling; sustained loads hit the 10600 MB/s transfer limit before any other constraint.
How much heat and power does the 1.35 V low-voltage SODIMM add when the terminal runs all day?
Rated at 1.35 V nominal and 1.50 V max, the unbuffered 204-pin module draws only a few watts and has no heat spreader, so fanless chassis airflow handles the thermal load.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
