Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green circuit board DDR3 SODIMM memory module with black chips, 204 pins, low profile

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX XT-5515Pro memory upgrade

SKU CH-YTZ2-CYFWT

4GB DDR3 1333 SODIMM module built for the POSIFLEX XT-5515Pro point-of-sale terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4 GB DDR3 1333 boosts POS terminal speed
  • 35 V low-voltage SODIMM cuts power draw
  • 204-pin CL9 module fits XT-5515Pro exactly
  • 2Rx8 unbuffered design ensures stable operation
  • Major OEM chips deliver enterprise-grade reliability

4GB DDR3 SODIMM for POSIFLEX XT-5515Pro

This 4GB DDR3 1333MHz module is built for the POSIFLEX XT-5515Pro JIVA fanless POS terminal. It uses a 204-pin SODIMM form factor with 2Rx8 organisation and CL9 latency. The part targets IT teams maintaining or upgrading these specific point-of-sale systems.

Single-module kit simplifies installation

The package contains one 4GB stick, so there is no need to match multiple modules or populate paired slots. Non-ECC unbuffered operation means the memory works with the terminal's standard motherboard without requiring ECC support. A lifetime replacement warranty backs the module after installation.

Low-voltage design suits fanless chassis

Rated at 1.35V with a 1.50V fallback, the module draws minimal power inside the sealed POS enclosure. Major OEM chips from Samsung, Micron or Hynix are stress-tested under load for stability. The lack of a heat spreader keeps the profile thin for tight SODIMM slots.

Points forts

  • 4 GB DDR3 1333 boosts POS terminal speed
  • 35 V low-voltage SODIMM cuts power draw
  • 204-pin CL9 module fits XT-5515Pro exactly
  • 2Rx8 unbuffered design ensures stable operation
  • Major OEM chips deliver enterprise-grade reliability

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions sur cet article

Will the 2Rx8 rank layout on this 4 GB SODIMM ever need a firmware update or chip replacement?

The 2Rx8 DDR3 modules use standard JEDEC chips and have no firmware; they are not field-serviceable, so no firmware updates or chip swaps are required.

What limit appears first when the POSIFLEX XT-5515Pro runs this memory at full load for hours?

The DDR3-1333 CL9 spec and 1.50 V operating voltage set the bandwidth and thermal ceiling; sustained loads hit the 10600 MB/s transfer limit before any other constraint.

How much heat and power does the 1.35 V low-voltage SODIMM add when the terminal runs all day?

Rated at 1.35 V nominal and 1.50 V max, the unbuffered 204-pin module draws only a few watts and has no heat spreader, so fanless chassis airflow handles the thermal load.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.