אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר

NEMIX RAM

NEMIX RAM DDR5 6400 256GB 2x128GB CL52 1.1V 4Rx4 RDIMM ECC memory upgrade for Supermicro X14SDW-42C-SP9F

SKU CH-V7DQ-ASFKW

256 GB DDR5-6400 ECC RDIMM kit (2 × 128 GB, CL52, 1.1 V, 4Rx4) validated for the Supermicro X14SDW-42C-SP9F motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 256 GB capacity with two 128 GB modules for full memory population
  • DDR5 6400 speed (PC5-51200) matches the board's rated frequency
  • CL52 latency and 1.10 V voltage meet the controller's exact timing requirements
  • 4Rx4 registered ECC design offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor verified for Supermicro X14SDW-42C-SP9F motherboard

Exact-match DDR5 kit for Supermicro X14SDW

This NEMIX RAM kit provides 256GB of DDR5 memory in a matched pair of 128GB registered DIMMs. It is built for the Supermicro X14SDW-42C-SP9F motherboard where the memory controller expects 4Rx4 organization, 1.1V operation and CL52 timing at 6400 MT/s.

Registered ECC limits at DDR5 6400

Registered ECC RDIMMs reduce electrical load on the memory controller so every slot can run fully populated at the rated 6400 MT/s speed. The 4Rx4 density and 1.1V voltage are fixed by the DDR5 PC5-51200 standard; the board must support this exact rank and voltage combination or the modules will not initialize.

Verify population rules before ordering

Consult the Supermicro X14SDW-42C-SP9F manual for approved DIMM population order, maximum capacity per channel and any BIOS version requirements. This kit uses 288-pin RDIMMs with ECC and registered buffering; it will not work in boards that require unbuffered UDIMMs or SODIMM form factors.

נקודות עיקריות

  • 256 GB capacity with two 128 GB modules for full memory population
  • DDR5 6400 speed (PC5-51200) matches the board's rated frequency
  • CL52 latency and 1.10 V voltage meet the controller's exact timing requirements
  • 4Rx4 registered ECC design offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor verified for Supermicro X14SDW-42C-SP9F motherboard

מפרט טכני

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

גרסאות נוספות של דגם זה

5 נוספים באותה הסדרה

אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.

שאלות על הפריט הזה

Should I choose the 256GB 2x128GB kit or a different capacity for my Supermicro X14SDW-42C-SP9F?

This kit provides 256GB total across two 128GB RDIMMs, matching the exact rank, voltage and timing the board expects for full-capacity recognition at DDR5 6400.

What does the DDR5 6400 rating mean once the modules are installed in the server?

The memory runs at 6400 MT/s with CL52 latency at 1.1V, delivering the rated PC5-51200 bandwidth when the motherboard populates both slots per its population rules.

How does the 288-pin RDIMM ECC registered interface affect real-world operation?

The registered design buffers each 4Rx4 module so the controller drives both slots at full speed, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.