暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR5 RDIMM modules with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 6400 256GB 2x128GB CL52 1.1V 4Rx4 RDIMM ECC memory upgrade for Supermicro X14SDW-42C-SP9F

SKU CH-V7DQ-ASFKW

256 GB DDR5-6400 ECC RDIMM kit (2 × 128 GB, CL52, 1.1 V, 4Rx4) validated for the Supermicro X14SDW-42C-SP9F motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

  • 256 GB capacity with two 128 GB modules for full memory population
  • DDR5 6400 speed (PC5-51200) matches the board's rated frequency
  • CL52 latency and 1.10 V voltage meet the controller's exact timing requirements
  • 4Rx4 registered ECC design offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor verified for Supermicro X14SDW-42C-SP9F motherboard

Exact-match DDR5 kit for Supermicro X14SDW

This NEMIX RAM kit provides 256GB of DDR5 memory in a matched pair of 128GB registered DIMMs. It is built for the Supermicro X14SDW-42C-SP9F motherboard where the memory controller expects 4Rx4 organization, 1.1V operation and CL52 timing at 6400 MT/s.

Registered ECC limits at DDR5 6400

Registered ECC RDIMMs reduce electrical load on the memory controller so every slot can run fully populated at the rated 6400 MT/s speed. The 4Rx4 density and 1.1V voltage are fixed by the DDR5 PC5-51200 standard; the board must support this exact rank and voltage combination or the modules will not initialize.

Verify population rules before ordering

Consult the Supermicro X14SDW-42C-SP9F manual for approved DIMM population order, maximum capacity per channel and any BIOS version requirements. This kit uses 288-pin RDIMMs with ECC and registered buffering; it will not work in boards that require unbuffered UDIMMs or SODIMM form factors.

特長

  • 256 GB capacity with two 128 GB modules for full memory population
  • DDR5 6400 speed (PC5-51200) matches the board's rated frequency
  • CL52 latency and 1.10 V voltage meet the controller's exact timing requirements
  • 4Rx4 registered ECC design offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor verified for Supermicro X14SDW-42C-SP9F motherboard

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Should I choose the 256GB 2x128GB kit or a different capacity for my Supermicro X14SDW-42C-SP9F?

This kit provides 256GB total across two 128GB RDIMMs, matching the exact rank, voltage and timing the board expects for full-capacity recognition at DDR5 6400.

What does the DDR5 6400 rating mean once the modules are installed in the server?

The memory runs at 6400 MT/s with CL52 latency at 1.1V, delivering the rated PC5-51200 bandwidth when the motherboard populates both slots per its population rules.

How does the 288-pin RDIMM ECC registered interface affect real-world operation?

The registered design buffers each 4Rx4 module so the controller drives both slots at full speed, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。