אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Four green DDR5 RDIMM modules in a row, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM DDR5 6400 256GB 4x64GB CL52 1.1V 2Rx4 ECC RDIMM Supermicro H14DST-F memory upgrade

SKU CH-E1SN-5QP35

A 256GB DDR5-6400 ECC registered RDIMM kit built to the exact rank, voltage and timing the Supermicro H14DST-F motherboard expects for full-capacity operation

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from four matched 64 GB modules for full server population
  • DDR5 6400 speed with CL52 latency runs at the board's rated frequency
  • 1 V registered ECC design reduces controller load and corrects single-bit errors
  • 2Rx4 288-pin RDIMM form factor matches the Supermicro H14DST-F memory slots exactly
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade stability

Exact-match server upgrade

This 256GB kit delivers four 64GB DDR5 RDIMMs rated at 6400MHz with CL52 latency and 1.1V operation. It is built for the Supermicro H14DST-F motherboard and uses registered ECC modules that the board’s memory controller expects.

Registered ECC 2Rx4 configuration

The 2Rx4 registered ECC design offloads the memory controller so all slots can run fully populated at rated speed while correcting single-bit errors on the fly. This rank, voltage, and timing combination is what decides whether the system recognises the full capacity and remains stable.

Four-module kit only

The package contains exactly four 64GB RDIMMs with no heat spreaders, cables, or software included. Builders needing a different capacity, a UDIMM form factor, or non-ECC memory must select another kit.

נקודות עיקריות

  • 256 GB total capacity from four matched 64 GB modules for full server population
  • DDR5 6400 speed with CL52 latency runs at the board's rated frequency
  • 1 V registered ECC design reduces controller load and corrects single-bit errors
  • 2Rx4 288-pin RDIMM form factor matches the Supermicro H14DST-F memory slots exactly
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade stability

מפרט טכני

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

שאלות על הפריט הזה

Will the DDR5-6400 speed run at 6400 MT/s in my Supermicro H14DST-F?

The kit is spec-matched to the H14DST-F memory controller, so all four slots populate at the rated 6400 MT/s with CL52 timing and 1.10 V.

Does the 288-pin RDIMM form factor fit the H14DST-F DIMM slots?

Yes, the board requires 288-pin registered RDIMMs; this kit uses exactly that form factor and is verified for the H14DST-F population rules.

What physical clearance do the modules need inside the chassis?

Modules have no heat spreader, so they fit standard server DIMM sockets without extra height clearance.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.