SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00497146BTC
재고 있음
NEMIX RAM
NEMIX RAM DDR5 6400 256GB 4x64GB CL52 1.1V 2Rx4 ECC RDIMM Supermicro H14DST-F memory upgrade
A 256GB DDR5-6400 ECC registered RDIMM kit built to the exact rank, voltage and timing the Supermicro H14DST-F motherboard expects for full-capacity operation
- Capacity256GB (4 x 64GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 256 GB total capacity from four matched 64 GB modules for full server population
- DDR5 6400 speed with CL52 latency runs at the board's rated frequency
- 1 V registered ECC design reduces controller load and corrects single-bit errors
- 2Rx4 288-pin RDIMM form factor matches the Supermicro H14DST-F memory slots exactly
- Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade stability
Exact-match server upgrade
This 256GB kit delivers four 64GB DDR5 RDIMMs rated at 6400MHz with CL52 latency and 1.1V operation. It is built for the Supermicro H14DST-F motherboard and uses registered ECC modules that the board’s memory controller expects.
Registered ECC 2Rx4 configuration
The 2Rx4 registered ECC design offloads the memory controller so all slots can run fully populated at rated speed while correcting single-bit errors on the fly. This rank, voltage, and timing combination is what decides whether the system recognises the full capacity and remains stable.
Four-module kit only
The package contains exactly four 64GB RDIMMs with no heat spreaders, cables, or software included. Builders needing a different capacity, a UDIMM form factor, or non-ECC memory must select another kit.
주요 특징
- 256 GB total capacity from four matched 64 GB modules for full server population
- DDR5 6400 speed with CL52 latency runs at the board's rated frequency
- 1 V registered ECC design reduces controller load and corrects single-bit errors
- 2Rx4 288-pin RDIMM form factor matches the Supermicro H14DST-F memory slots exactly
- Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade stability
사양
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-924K4 |
| Capacity | 256GB (4 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 4X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
이 상품에 대한 질문
Will the DDR5-6400 speed run at 6400 MT/s in my Supermicro H14DST-F?
The kit is spec-matched to the H14DST-F memory controller, so all four slots populate at the rated 6400 MT/s with CL52 timing and 1.10 V.
Does the 288-pin RDIMM form factor fit the H14DST-F DIMM slots?
Yes, the board requires 288-pin registered RDIMMs; this kit uses exactly that form factor and is verified for the H14DST-F population rules.
What physical clearance do the modules need inside the chassis?
Modules have no heat spreader, so they fit standard server DIMM sockets without extra height clearance.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
