אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Three frameless VGA fans with black covers and 4 pin connectors

OEM Industries

OEM Industries FD7010H12S 12V .35A 3 pcs 4 Pin Frameless VGA Fan for HD7990

SKU CH-SQSA-P4BHC

Three frameless 12V 0.35A fans with 4-pin connectors and black covers for ATI HD7990 graphics cards

  • Bearing TypeSleeve bearing
  • Power Connector4 Pin
  • Fan Color2-Tone
  • LEDNo LED
  • Direct-fit replacement for HD7990 graphics cards
  • Three frameless fans with black covers install cleanly
  • 12 V .35 A power draw per fan keeps load low
  • 4-pin connector enables PWM speed control
  • Sleeve bearing runs quietly in standard operation

Three frameless fans for HD 7990

This set contains three frameless VGA fans built for the ATI HD 7990 graphics card. Each unit runs on 12 V at 0.35 A and uses a 4-pin connector. The sleeve bearing keeps the assembly simple for direct replacement of the original cooling modules.

Sustained airflow with sleeve bearings

Under continuous load the sleeve bearing provides steady rotation without the complexity of ball-bearing designs. The frameless construction lets the fans sit close to the heatsink, moving air through the dense fin stack during long gaming or compute sessions. Performance remains consistent as long as the bearing stays lubricated.

Direct swap for the reference cooler

Installation means removing the old fans and plugging the 4-pin headers into the same positions on the HD 7990 PCB. The black cover aligns with the original shroud mounting points. The main risk is sleeve-bearing wear over time, which can increase noise or reduce speed if the lubricant dries out.

נקודות עיקריות

  • Direct-fit replacement for HD7990 graphics cards
  • Three frameless fans with black covers install cleanly
  • 12 V .35 A power draw per fan keeps load low
  • 4-pin connector enables PWM speed control
  • Sleeve bearing runs quietly in standard operation

מפרט טכני

Bearing TypeSleeve bearing
Power Connector4 Pin
Fan Color2-Tone
LEDNo LED

שאלות על הפריט הזה

How much power does the 12 V .35 A fan draw when the HD7990 runs all day?

Each fan is rated at 12 volts and 0.35 amps, so the card's cooling system pulls a steady 0.35 amps per fan from the 12 V rail under continuous load.

What must my graphics card already have for these three frameless fans to connect?

The HD7990 needs three 4-pin headers that accept the 3/4-wire connector on each frameless fan; the original cooler provides those headers.

Will the sleeve-bearing fans fit the original HD7990 shroud and screw pattern without modification?

Yes, the FD7010H12S frameless design matches the factory mounting points and black cover on the HD7990, so they install directly onto the existing heatsink.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.