暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Three frameless VGA fans with black covers and 4 pin connectors

OEM Industries

OEM Industries FD7010H12S 12V .35A 3 pcs 4 Pin Frameless VGA Fan for HD7990

SKU CH-SQSA-P4BHC

Three frameless 12V 0.35A fans with 4-pin connectors and black covers for ATI HD7990 graphics cards

  • Bearing TypeSleeve bearing
  • Power Connector4 Pin
  • Fan Color2-Tone
  • LEDNo LED
  • Direct-fit replacement for HD7990 graphics cards
  • Three frameless fans with black covers install cleanly
  • 12 V .35 A power draw per fan keeps load low
  • 4-pin connector enables PWM speed control
  • Sleeve bearing runs quietly in standard operation

Three frameless fans for HD 7990

This set contains three frameless VGA fans built for the ATI HD 7990 graphics card. Each unit runs on 12 V at 0.35 A and uses a 4-pin connector. The sleeve bearing keeps the assembly simple for direct replacement of the original cooling modules.

Sustained airflow with sleeve bearings

Under continuous load the sleeve bearing provides steady rotation without the complexity of ball-bearing designs. The frameless construction lets the fans sit close to the heatsink, moving air through the dense fin stack during long gaming or compute sessions. Performance remains consistent as long as the bearing stays lubricated.

Direct swap for the reference cooler

Installation means removing the old fans and plugging the 4-pin headers into the same positions on the HD 7990 PCB. The black cover aligns with the original shroud mounting points. The main risk is sleeve-bearing wear over time, which can increase noise or reduce speed if the lubricant dries out.

特長

  • Direct-fit replacement for HD7990 graphics cards
  • Three frameless fans with black covers install cleanly
  • 12 V .35 A power draw per fan keeps load low
  • 4-pin connector enables PWM speed control
  • Sleeve bearing runs quietly in standard operation

仕様

Bearing TypeSleeve bearing
Power Connector4 Pin
Fan Color2-Tone
LEDNo LED

この商品に関する質問

How much power does the 12 V .35 A fan draw when the HD7990 runs all day?

Each fan is rated at 12 volts and 0.35 amps, so the card's cooling system pulls a steady 0.35 amps per fan from the 12 V rail under continuous load.

What must my graphics card already have for these three frameless fans to connect?

The HD7990 needs three 4-pin headers that accept the 3/4-wire connector on each frameless fan; the original cooler provides those headers.

Will the sleeve-bearing fans fit the original HD7990 shroud and screw pattern without modification?

Yes, the FD7010H12S frameless design matches the factory mounting points and black cover on the HD7990, so they install directly onto the existing heatsink.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。