OWC 128GB DDR4 2933 CL21 4Rx4 288-pin 1.2V ECC Load Reduced LRDIMM Dell PowerEdge R840 R940xa
- 128GB
- 288-Pin DDR4 ECC LR…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
OWC
Single 256 GB DDR4 3200 CL22 ECC load-reduced 288-pin LRDIMM for Supermicro H12 server and workstation boards
Capacity 256GB
This 256GB DDR4 3200 CL22 module is a single 288-pin load-reduced DIMM built for Supermicro motherboards H12DSG-O-CPU, H12DST-B, H12DSU-iN, H12SSL-C and H12SSL-i. It targets server, workstation and NAS administrators who need maximum registered capacity per slot. The 1.2V JEDEC-standard part is not compatible with standard desktop computers.
The load-reduced architecture reduces electrical load on the memory bus, allowing dense 8Rx4 population on supported Supermicro platforms. A 288-pin DDR4 connector ensures mechanical compatibility with the listed boards, while ECC protection corrects single-bit errors in mission-critical workloads. This module cannot be mixed with unbuffered or standard registered ECC DIMMs.
The part replaces smaller load-reduced modules to raise total system memory without adding slots, and it runs at 3200MHz while remaining backward compatible with 2133MHz, 2400MHz, 2666MHz and 2933MHz bus speeds. The jump is worthwhile when virtualisation, in-memory databases or large dataset processing demand more than the currently installed capacity per channel.
טרם פורסם מפרט טכני לפריט זה.
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
The module is rated PC4-25600 3200MHz CL22 and will run at 3200MHz when the motherboard and CPU support that speed; otherwise it falls back to 2933, 2666, 2400 or 2133MHz automatically.
It fits a standard 288-pin DDR4 DIMM slot on the listed Supermicro H12 boards; the module height follows the JEDEC LRDIMM form factor so verify heatsink clearance in your chassis.
Power down, open the chassis, align the notch with the 288-pin slot, press firmly until both latches click, then enter the BIOS to confirm the module is recognised at the correct speed and ECC mode.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?