OWC 2S1D41R804GB 4GB DDR4 2133MHz CL15 1.2V 260pin SODIMM memory upgrade
- 4GB
- 260-Pin DDR4 Non-EC…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
OWC
4GB DDR4 2133MHz CL15 1.2V 260-pin SODIMM for HP Envy 15-as series laptops
This OWC module provides 4GB of DDR4 memory at 2133MHz with CL15 latency. It is built specifically for HP Envy 15 models including 15-as004la, 15-as004na, 15-as004ng, 15-as004no and 15-as005na. The 260-pin SODIMM form factor fits compatible laptops, notebooks and mini desktops. Buyers needing higher capacity or ECC support should look elsewhere.
The module runs at the standard DDR4 voltage of 1.2V without a heat spreader. Unbuffered, non-ECC design keeps power draw minimal during typical office and web workloads. Silent operation is assured because there are no active cooling components. This makes it suitable for noise-sensitive environments.
JEDEC compliance and OWC in-house testing ensure consistent throughput during extended multitasking sessions. The single-rank 1Rx8 organisation helps maintain signal integrity when the system runs memory-intensive applications for long periods. No thermal throttling occurs because the low-voltage design generates minimal heat.
| Brand | OWC |
|---|---|
| Part Number | 2S1D41R804GB |
| Capacity | 4GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | HP ENVY 15-as004la HP ENVY 15-as004na HP ENVY 15-as004ng HP ENVY 15-as004no HP ENVY 15-as005na |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
Power off the laptop and disconnect the adapter. Remove the base cover screws, lift the cover, locate the memory slot, align the module notch with the slot key, insert firmly until the side clips click into place, then reassemble.
No scheduled maintenance is required. The module has no heat spreader and runs at 1.2V; if a future upgrade demands more capacity, replace it with a higher-density DDR4 2133 SODIMM of the same voltage and pin count.
The 4GB capacity will saturate before thermal or bandwidth limits, causing the system to swap to storage and reducing responsiveness during heavy multitasking.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
אף שפה לא תואמת.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?