OWC 2S1D41R804GB 4GB DDR4 2133MHz CL15 1.2V 260pin SODIMM memory upgrade
- 4GB
- 260-Pin DDR4 Non-EC…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
OWC
4GB DDR4 2133MHz CL15 1.2V 260-pin SODIMM for HP Envy 15-as series laptops
This OWC module provides 4GB of DDR4 memory at 2133MHz with CL15 latency. It is built specifically for HP Envy 15 models including 15-as004la, 15-as004na, 15-as004ng, 15-as004no and 15-as005na. The 260-pin SODIMM form factor fits compatible laptops, notebooks and mini desktops. Buyers needing higher capacity or ECC support should look elsewhere.
The module runs at the standard DDR4 voltage of 1.2V without a heat spreader. Unbuffered, non-ECC design keeps power draw minimal during typical office and web workloads. Silent operation is assured because there are no active cooling components. This makes it suitable for noise-sensitive environments.
JEDEC compliance and OWC in-house testing ensure consistent throughput during extended multitasking sessions. The single-rank 1Rx8 organisation helps maintain signal integrity when the system runs memory-intensive applications for long periods. No thermal throttling occurs because the low-voltage design generates minimal heat.
| Brand | OWC |
|---|---|
| Part Number | 2S1D41R804GB |
| Capacity | 4GB |
| Type | 260-Pin DDR4 Non-ECC SODIMM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Heat Spreader | No |
| Compatible System | HP ENVY 15-as004la HP ENVY 15-as004na HP ENVY 15-as004ng HP ENVY 15-as004no HP ENVY 15-as005na |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Power off the laptop and disconnect the adapter. Remove the base cover screws, lift the cover, locate the memory slot, align the module notch with the slot key, insert firmly until the side clips click into place, then reassemble.
No scheduled maintenance is required. The module has no heat spreader and runs at 1.2V; if a future upgrade demands more capacity, replace it with a higher-density DDR4 2133 SODIMM of the same voltage and pin count.
The 4GB capacity will saturate before thermal or bandwidth limits, causing the system to swap to storage and reducing responsiveness during heavy multitasking.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?