OWC 8GB DDR3 1866 ECC Unbuffered UDIMM desktop RAM
- 8GB
- DDR3 1866 (PC3 1490…
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
OWC
Dual-channel 8 GB DDR3L kit at 1866 MHz with ECC and 1.35 V for workstations and servers
Capacity 8GB (2 x 4GB)
This OWC kit provides eight gigabytes of DDR3L memory in a matched pair of four-gigabyte modules. The sticks run at 1866 MT/s with a CAS latency of 13 and operate at the low 1.35 volt DDR3L standard. Error-correcting code and unbuffered operation make the kit suitable for workstations, servers and NAS units that require data integrity.
Systems that support unbuffered ECC DDR3L will benefit from the error detection and correction these modules provide. Desktop boards without ECC support in the chipset or BIOS cannot use the feature and should select non-ECC memory instead. The dual-channel configuration helps bandwidth on compatible two-slot or four-slot motherboards.
Each 240-pin module keys into a standard DDR3 desktop slot; align the notch and press until the retention clips latch. Common issues include mixing these ECC sticks with non-ECC modules or populating slots in the wrong order for the platform's channel layout. Consult the system manual for the approved population sequence.
| Brand | OWC |
|---|---|
| Part Number | 1E8T31R8008P |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3L 1866 (PC3L 14900) |
| CAS Latency | CL13 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Black |
| Heat Spreader | No |
| Recommend Use | Workstations, Servers, and NAS Systems |
| LED Color | None |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
Yes, the kit uses 240-pin DDR3L UDIMMs at 1.35 V with ECC, so the board must support that exact combination.
The board will run all modules at the slowest common settings, so the CL13 modules will operate at CL13 alongside CL11 sticks.
Check the BIOS memory summary or run a tool like CPU-Z; it should report 8 GB, 1866 MHz, and ECC enabled.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?