Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two black 240-pin DDR3L UDIMM modules without heat spreaders

OWC

OWC 8GB (2x4GB) DDR3L 1866 CL13 1.35V ECC UDIMM Kit

SKU CH-GSQG-MZRFZ

Dual-channel 8 GB DDR3L kit at 1866 MHz with ECC and 1.35 V for workstations and servers

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3L 1866 (PC3L 14900)
  • CAS LatencyCL13
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

  • ECC protection guards data integrity in critical workloads
  • 35 V DDR3L operation reduces power draw and heat
  • Dual-channel 8 GB kit (2 × 4 GB) doubles memory bandwidth
  • CL13 latency at 1866 MHz delivers responsive multitasking
  • 240-pin unbuffered UDIMM fits standard desktop, workstation and server slots

DDR3L 1866 ECC UDIMM Kit

This OWC kit provides eight gigabytes of DDR3L memory in a matched pair of four-gigabyte modules. The sticks run at 1866 MT/s with a CAS latency of 13 and operate at the low 1.35 volt DDR3L standard. Error-correcting code and unbuffered operation make the kit suitable for workstations, servers and NAS units that require data integrity.

Suited for ECC platforms only

Systems that support unbuffered ECC DDR3L will benefit from the error detection and correction these modules provide. Desktop boards without ECC support in the chipset or BIOS cannot use the feature and should select non-ECC memory instead. The dual-channel configuration helps bandwidth on compatible two-slot or four-slot motherboards.

Straightforward DIMM installation

Each 240-pin module keys into a standard DDR3 desktop slot; align the notch and press until the retention clips latch. Common issues include mixing these ECC sticks with non-ECC modules or populating slots in the wrong order for the platform's channel layout. Consult the system manual for the approved population sequence.

Points forts

  • ECC protection guards data integrity in critical workloads
  • 35 V DDR3L operation reduces power draw and heat
  • Dual-channel 8 GB kit (2 × 4 GB) doubles memory bandwidth
  • CL13 latency at 1866 MHz delivers responsive multitasking
  • 240-pin unbuffered UDIMM fits standard desktop, workstation and server slots

Caractéristiques

BrandOWC
Part Number1E8T31R8008P
Capacity8GB (2 x 4GB)
SpeedDDR3L 1866 (PC3L 14900)
CAS LatencyCL13
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorBlack
Heat SpreaderNo
Recommend UseWorkstations, Servers, and NAS Systems
LED ColorNone

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Does my motherboard need a 240-pin DDR3L slot that accepts 1.35 V unbuffered ECC modules for this kit to work?

Yes, the kit uses 240-pin DDR3L UDIMMs at 1.35 V with ECC, so the board must support that exact combination.

Can I keep my existing CL11 DDR3L 1866 sticks and add this CL13 kit without timing conflicts?

The board will run all modules at the slowest common settings, so the CL13 modules will operate at CL13 alongside CL11 sticks.

How do I confirm the system sees the full 8 GB at 1866 MT/s with ECC active after installation?

Check the BIOS memory summary or run a tool like CPU-Z; it should report 8 GB, 1866 MHz, and ECC enabled.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.