אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Black square copper CPU water block with integrated fittings and RGB diffuser

Phanteks

Phanteks PH-GEF_CPU450_DBK Glacier EZ-Fit 450CPU Copper CPU Water Block diy cooling

SKU CH-A2A7-E6591 MPN PH-GEF_CPU450_DBK

Copper CPU water block with integrated 16mm EZ-Fit fittings, 0.15mm fin array and D-RGB lighting for Intel LGA 1700 and AMD AM5 sockets

  • TypeComplete DIY Water-Cooling Kit
  • Block CompatibilityIntel: LGA 1700 AMD: AM4 /AM5
  • Block Dim.72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
  • Radiator Size360mm
  • Fan Size3 Fan Slots (120 mm)
  • Tube Dim.4 x 90 cm
  • Quick setup with integrated 16mm EZ-Fit fittings
  • Superior heat dissipation from 0.15mm copper fin array
  • Even CPU pressure via auto-balancing metal mounting
  • Sleek D-RGB lighting diffused through POM body
  • Compatible with Intel LGA 1700 and AMD AM5 platforms

Phanteks Glacier EZ-Fit 450CPU Copper Water Block

The Phanteks Glacier EZ-Fit 450CPU is a copper CPU water block designed for custom liquid-cooling loops. It features integrated 16mm EZ-Fit fittings that accept both hard and soft tubing without extra parts. The block is compatible with Intel LGA 1700 and AMD AM5 sockets. It includes addressable D-RGB lighting diffused through a POM body.

Who this suits and who should look elsewhere

This block suits builders assembling a custom loop who want a copper cold plate with pre-installed 16mm fittings and RGB lighting. It is not for builders using processor sockets other than Intel LGA 1700 or AMD AM5. It is not for users who need a complete cooling kit with radiator, pump, reservoir and tubing included.

0.15mm micro-fin copper base

The cold plate uses a precision copper base with an ultra-fine 0.15mm fin array to maximise surface area for heat transfer. An auto-balancing mounting system with metal springs applies even pressure across the CPU. The block measures 72 x 64 x 25.7mm.

נקודות עיקריות

  • Quick setup with integrated 16mm EZ-Fit fittings
  • Superior heat dissipation from 0.15mm copper fin array
  • Even CPU pressure via auto-balancing metal mounting
  • Sleek D-RGB lighting diffused through POM body
  • Compatible with Intel LGA 1700 and AMD AM5 platforms

מפרט טכני

BrandPhanteks
ModelPH-GEF_KIT360-D30_DWT
TypeComplete DIY Water-Cooling Kit
Block CompatibilityIntel: LGA 1700
AMD: AM4 /AM5
Block Dim.72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
Radiator Size360mm
Fan Size3 Fan Slots (120 mm)
Tube Dim.4 x 90 cm
Tube MaterialFrosted HI-PMMA
Package ContentsPH-GEF_RAD363_WT 1x
PH-GEF­_CPU450_DWT 1x
PH-GEF_RES140_DWT 1x
PH-GEF_ST16_CL 1x
PH-GEF_HT16_FR 4x
PH-F120D30_DRGB_PWM_WT01_3P 1x
Tube Cutter 1x
Bending Insert 1x
Bending Guides 1x
Squeeze Bottle 1x
24-Pin Jumper 1x
Sandpaper 1x
Tool Set Manual 1x
GLACIER EZ-FIT KIT Manual 1x
משקל משלוח0.77 kg
מידות האריזה152 × 152 × 64 mm

שאלות על הפריט הזה

Does the copper block require separate 16mm fittings for my hard-tube loop?

No, the block ships with integrated 16mm EZ-Fit fittings pre-installed for both hard and soft tubing, so no extra fittings are needed.

Will the auto-balancing springs maintain even pressure on my existing LGA 1700 processor?

Yes, the fully metal mounting system uses automatic pressure-balancing springs designed for Intel LGA 1700 and AMD AM5 sockets to ensure consistent contact.

How can I verify the D-RGB lighting is functioning after assembling the loop?

Connect the included 3-pack 120mm D-RGB PWM fans and the block's lighting to a compatible motherboard header, then confirm illumination through the POM body.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.