نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black square copper CPU water block with integrated fittings and RGB diffuser

Phanteks

Phanteks PH-GEF_CPU450_DBK Glacier EZ-Fit 450CPU Copper CPU Water Block diy cooling

SKU CH-A2A7-E6591 MPN PH-GEF_CPU450_DBK

Copper CPU water block with integrated 16mm EZ-Fit fittings, 0.15mm fin array and D-RGB lighting for Intel LGA 1700 and AMD AM5 sockets

  • TypeComplete DIY Water-Cooling Kit
  • Block CompatibilityIntel: LGA 1700 AMD: AM4 /AM5
  • Block Dim.72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
  • Radiator Size360mm
  • Fan Size3 Fan Slots (120 mm)
  • Tube Dim.4 x 90 cm
  • Quick setup with integrated 16mm EZ-Fit fittings
  • Superior heat dissipation from 0.15mm copper fin array
  • Even CPU pressure via auto-balancing metal mounting
  • Sleek D-RGB lighting diffused through POM body
  • Compatible with Intel LGA 1700 and AMD AM5 platforms

Phanteks Glacier EZ-Fit 450CPU Copper Water Block

The Phanteks Glacier EZ-Fit 450CPU is a copper CPU water block designed for custom liquid-cooling loops. It features integrated 16mm EZ-Fit fittings that accept both hard and soft tubing without extra parts. The block is compatible with Intel LGA 1700 and AMD AM5 sockets. It includes addressable D-RGB lighting diffused through a POM body.

Who this suits and who should look elsewhere

This block suits builders assembling a custom loop who want a copper cold plate with pre-installed 16mm fittings and RGB lighting. It is not for builders using processor sockets other than Intel LGA 1700 or AMD AM5. It is not for users who need a complete cooling kit with radiator, pump, reservoir and tubing included.

0.15mm micro-fin copper base

The cold plate uses a precision copper base with an ultra-fine 0.15mm fin array to maximise surface area for heat transfer. An auto-balancing mounting system with metal springs applies even pressure across the CPU. The block measures 72 x 64 x 25.7mm.

أبرز المميزات

  • Quick setup with integrated 16mm EZ-Fit fittings
  • Superior heat dissipation from 0.15mm copper fin array
  • Even CPU pressure via auto-balancing metal mounting
  • Sleek D-RGB lighting diffused through POM body
  • Compatible with Intel LGA 1700 and AMD AM5 platforms

المواصفات

BrandPhanteks
ModelPH-GEF_KIT360-D30_DWT
TypeComplete DIY Water-Cooling Kit
Block CompatibilityIntel: LGA 1700
AMD: AM4 /AM5
Block Dim.72 x 64 x 25.7mm (2.83 x 2.52 x 1in)
Radiator Size360mm
Fan Size3 Fan Slots (120 mm)
Tube Dim.4 x 90 cm
Tube MaterialFrosted HI-PMMA
Package ContentsPH-GEF_RAD363_WT 1x
PH-GEF­_CPU450_DWT 1x
PH-GEF_RES140_DWT 1x
PH-GEF_ST16_CL 1x
PH-GEF_HT16_FR 4x
PH-F120D30_DRGB_PWM_WT01_3P 1x
Tube Cutter 1x
Bending Insert 1x
Bending Guides 1x
Squeeze Bottle 1x
24-Pin Jumper 1x
Sandpaper 1x
Tool Set Manual 1x
GLACIER EZ-FIT KIT Manual 1x
وزن الشحنة0.77 kg
أبعاد الطرد152 × 152 × 64 mm

أسئلة حول هذا المنتج

Does the copper block require separate 16mm fittings for my hard-tube loop?

No, the block ships with integrated 16mm EZ-Fit fittings pre-installed for both hard and soft tubing, so no extra fittings are needed.

Will the auto-balancing springs maintain even pressure on my existing LGA 1700 processor?

Yes, the fully metal mounting system uses automatic pressure-balancing springs designed for Intel LGA 1700 and AMD AM5 sockets to ensure consistent contact.

How can I verify the D-RGB lighting is functioning after assembling the loop?

Connect the included 3-pack 120mm D-RGB PWM fans and the block's lighting to a compatible motherboard header, then confirm illumination through the POM body.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.