אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Brown PLA+ filament spool in vacuum-sealed retail box

PrintOxe

PrintOxe PLA+ Pro Wood Colour Filament 1.75mm 1Kg +/-0.03mm

SKU CH-Y15W-G69H0

Wood-colour PLA+ filament with 1.75 mm diameter, ±0.03 mm accuracy, and 1 kg net weight on a vacuum-sealed spool

  • ColorBrown
  • TypeFilament
  • Wood-look prints with 1.75 mm diameter and ±.03 mm accuracy
  • 1 kg spool vacuum-sealed with desiccant for moisture protection
  • High-purity PLA+ blend gives extra strength and minimal warping
  • Strong layer adhesion prevents cracking or bubbles during printing
  • Prints at 190 °C – 200 °C on most 1.75 mm FDM printers

PrintOxe PLA+ Pro Wood Colour Filament

This 1.75 mm diameter PLA+ filament comes in a 1 kg spool with a dimensional accuracy of +/- 0.03 mm. It is designed for FDM 3D printers and suits makers who want a wood colour finish without using actual wood material. The high-purity, non-toxic formulation aims to reduce shrinkage and warping during printing.

Vacuum-sealed spool with desiccant for moisture

The spool measures 7.88" in diameter, 2.69" in width and has a 2.20" hub hole. It arrives vacuum sealed with desiccant inside the box to guard against humidity. This packaging helps maintain material quality so the filament feeds consistently into compatible printers such as Creality, Prusa, Ultimaker and others using 1.75 mm filament.

Recommended extrusion temperature 190°C to 200°C

Printing at 190°C to 200°C (374°F to 392°F) promotes strong layer adhesion and a smooth surface finish. The PLA+ blend is engineered for extra strength, lower shrinkage and minimal cracking or bubbling. Buyers who need a different diameter, a larger spool size or actual wood composite material should look elsewhere.

נקודות עיקריות

  • Wood-look prints with 1.75 mm diameter and ±.03 mm accuracy
  • 1 kg spool vacuum-sealed with desiccant for moisture protection
  • High-purity PLA+ blend gives extra strength and minimal warping
  • Strong layer adhesion prevents cracking or bubbles during printing
  • Prints at 190 °C – 200 °C on most 1.75 mm FDM printers

מפרט טכני

BrandPrintOxe
ModelPLA+ / Pro PLA
ColorBrown
TypeFilament

שאלות על הפריט הזה

How tight is the diameter tolerance before it affects extrusion consistency?

The filament is manufactured to a +/- 0.03 mm dimensional accuracy, keeping extrusion steady during long prints.

Does the spool heat up or draw more power during extended printing sessions?

Filament itself generates no heat or power draw; only the printer's hotend consumes energy at the recommended 190°C–200°C nozzle temperature.

Which printers accept this 1.75 mm spool without an adapter?

Any FDM printer designed for 1.75 mm filament — including Creality, Prusa, Ultimaker, Flashforge and many others — fits the standard 7.88" spool with a 2.20" hub hole.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.