نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Brown PLA+ filament spool in vacuum-sealed retail box

PrintOxe

PrintOxe PLA+ Pro Wood Colour Filament 1.75mm 1Kg +/-0.03mm

SKU CH-Y15W-G69H0

Wood-colour PLA+ filament with 1.75 mm diameter, ±0.03 mm accuracy, and 1 kg net weight on a vacuum-sealed spool

  • ColorBrown
  • TypeFilament
  • Wood-look prints with 1.75 mm diameter and ±.03 mm accuracy
  • 1 kg spool vacuum-sealed with desiccant for moisture protection
  • High-purity PLA+ blend gives extra strength and minimal warping
  • Strong layer adhesion prevents cracking or bubbles during printing
  • Prints at 190 °C – 200 °C on most 1.75 mm FDM printers

PrintOxe PLA+ Pro Wood Colour Filament

This 1.75 mm diameter PLA+ filament comes in a 1 kg spool with a dimensional accuracy of +/- 0.03 mm. It is designed for FDM 3D printers and suits makers who want a wood colour finish without using actual wood material. The high-purity, non-toxic formulation aims to reduce shrinkage and warping during printing.

Vacuum-sealed spool with desiccant for moisture

The spool measures 7.88" in diameter, 2.69" in width and has a 2.20" hub hole. It arrives vacuum sealed with desiccant inside the box to guard against humidity. This packaging helps maintain material quality so the filament feeds consistently into compatible printers such as Creality, Prusa, Ultimaker and others using 1.75 mm filament.

Recommended extrusion temperature 190°C to 200°C

Printing at 190°C to 200°C (374°F to 392°F) promotes strong layer adhesion and a smooth surface finish. The PLA+ blend is engineered for extra strength, lower shrinkage and minimal cracking or bubbling. Buyers who need a different diameter, a larger spool size or actual wood composite material should look elsewhere.

أبرز المميزات

  • Wood-look prints with 1.75 mm diameter and ±.03 mm accuracy
  • 1 kg spool vacuum-sealed with desiccant for moisture protection
  • High-purity PLA+ blend gives extra strength and minimal warping
  • Strong layer adhesion prevents cracking or bubbles during printing
  • Prints at 190 °C – 200 °C on most 1.75 mm FDM printers

المواصفات

BrandPrintOxe
ModelPLA+ / Pro PLA
ColorBrown
TypeFilament

أسئلة حول هذا المنتج

How tight is the diameter tolerance before it affects extrusion consistency?

The filament is manufactured to a +/- 0.03 mm dimensional accuracy, keeping extrusion steady during long prints.

Does the spool heat up or draw more power during extended printing sessions?

Filament itself generates no heat or power draw; only the printer's hotend consumes energy at the recommended 190°C–200°C nozzle temperature.

Which printers accept this 1.75 mm spool without an adapter?

Any FDM printer designed for 1.75 mm filament — including Creality, Prusa, Ultimaker, Flashforge and many others — fits the standard 7.88" spool with a 2.20" hub hole.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.