SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 $
0.00494419BTC
במלאי
RIMLANCE
RIMLANCE RUD10600S8C2K8 8GB (2x4GB) DDR3 1333 desktop RAM
Dual-channel 8 GB DDR3 kit running at 1333 MHz (PC3-10600) with CL9 latency and 1.5 V operation
- Capacity8GB (2 x 4GB)
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor Brand Chipset
- 8GB dual-channel capacity for smoother multitasking
- 1333 MHz DDR3 speed for responsive system performance
- CL9 latency for efficient data access
- 5 V operation for standard desktop compatibility
- Unbuffered UDIMM design for straightforward installation
DDR3 1333 dual-channel kit
This RIMLANCE memory kit delivers 8 GB of DDR3 desktop RAM across two 4 GB unbuffered DIMMs. Rated at 1333 MHz with CL9 latency, it runs at the standard 1.5 V for DDR3 systems. The UDIMM form factor fits typical desktop motherboards.
Upgrade for older DDR3 desktops
Builders restoring or expanding a DDR3 platform gain an affordable capacity boost for everyday multitasking. Systems that require registered or ECC modules cannot use this kit, and boards limited to lower densities may not recognise the full 8 GB.
1333 MHz speed rating
The PC3-10600 specification decides whether the modules match the motherboard's supported memory bus. If the board only accepts slower DDR3 grades, the kit will down-clock; if it demands faster grades, the system may not post.
נקודות עיקריות
- 8GB dual-channel capacity for smoother multitasking
- 1333 MHz DDR3 speed for responsive system performance
- CL9 latency for efficient data access
- 5 V operation for standard desktop compatibility
- Unbuffered UDIMM design for straightforward installation
מפרט טכני
| Brand | RIMLANCE |
|---|---|
| Model | RUD10600S8C2K8 |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
שאלות על הפריט הזה
Will these modules fit a standard desktop motherboard with DDR3 slots?
Yes, they are UDIMM DDR3 sticks at 1333 MHz, the standard form factor for desktop DDR3 memory slots.
What voltage do the modules require and is it within the usual desktop range?
The kit runs at 1.5 V, which is the standard voltage for DDR3 desktop memory and matches most motherboard defaults.
Does the kit support dual-channel operation on a board with four slots?
The matched pair of 4 GB modules is designed for dual-channel use; populate the correct colour-coded slots for the best bandwidth.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
