我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR3 UDIMM sticks with black chips and gold contacts

RIMLANCE

RIMLANCE RUD10600S8C2K8 8GB (2x4GB) DDR3 1333 desktop RAM

SKU CH-KMQT-69TZW

Dual-channel 8 GB DDR3 kit running at 1333 MHz (PC3-10600) with CL9 latency and 1.5 V operation

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor Brand Chipset
  • 8GB dual-channel capacity for smoother multitasking
  • 1333 MHz DDR3 speed for responsive system performance
  • CL9 latency for efficient data access
  • 5 V operation for standard desktop compatibility
  • Unbuffered UDIMM design for straightforward installation

DDR3 1333 dual-channel kit

This RIMLANCE memory kit delivers 8 GB of DDR3 desktop RAM across two 4 GB unbuffered DIMMs. Rated at 1333 MHz with CL9 latency, it runs at the standard 1.5 V for DDR3 systems. The UDIMM form factor fits typical desktop motherboards.

Upgrade for older DDR3 desktops

Builders restoring or expanding a DDR3 platform gain an affordable capacity boost for everyday multitasking. Systems that require registered or ECC modules cannot use this kit, and boards limited to lower densities may not recognise the full 8 GB.

1333 MHz speed rating

The PC3-10600 specification decides whether the modules match the motherboard's supported memory bus. If the board only accepts slower DDR3 grades, the kit will down-clock; if it demands faster grades, the system may not post.

商品特色

  • 8GB dual-channel capacity for smoother multitasking
  • 1333 MHz DDR3 speed for responsive system performance
  • CL9 latency for efficient data access
  • 5 V operation for standard desktop compatibility
  • Unbuffered UDIMM design for straightforward installation

商品規格

BrandRIMLANCE
ModelRUD10600S8C2K8
Capacity8GB (2 x 4GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset

商品問答

Will these modules fit a standard desktop motherboard with DDR3 slots?

Yes, they are UDIMM DDR3 sticks at 1333 MHz, the standard form factor for desktop DDR3 memory slots.

What voltage do the modules require and is it within the usual desktop range?

The kit runs at 1.5 V, which is the standard voltage for DDR3 desktop memory and matches most motherboard defaults.

Does the kit support dual-channel operation on a board with four slots?

The matched pair of 4 GB modules is designed for dual-channel use; populate the correct colour-coded slots for the best bandwidth.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。