אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.

רשימת ניטור התחבר
Seagate Nytro 5550M 800GB 2.5 inch 7mm enterprise SSD

Seagate

Seagate XP800LE10005 Nytro 5550M 800GB enterprise SSD

SKU CH-AR8E-TKTA2 MPN XP800LE10005

Enterprise 2.5" 7mm NVMe SSD delivering 6000 MB/s reads and 1900 MB/s writes with 4300 TBW endurance

  • Used ForConsumer
  • Form Factor2.5" 7mm
  • Capacity800GB
  • Memory Components3D eTLC
  • InterfacePCI-Express 4.0 x4
  • ProtocolNVMe
  • Up to 6000 MB/s sequential read for fast data access
  • Up to 1,000,000 IOPS random read for high transaction workloads
  • 4300 TBW endurance for long write life
  • 5 million hour MTBF for enterprise reliability
  • PCIe 4.0 x4 NVMe interface for modern server platforms

800GB PCIe 4.0 NVMe Enterprise Drive

The Seagate Nytro 5550M XP800LE10005 is an 800GB enterprise solid-state drive built for PCIe 4.0 x4 slots. It uses 3D eTLC NAND and the NVMe protocol to deliver sustained sequential reads up to 6000 MBps and writes up to 1900 MBps. Random read performance reaches 1,000,000 IOPS with 140,000 IOPS for random writes. The drive is rated for 4300TB written and a 2,500,000-hour MTBF.

Suited for high-throughput server workloads

This drive fits servers and storage arrays that need consistent low-latency NVMe performance over a PCIe 4.0 interface. The 2.5-inch 7mm form factor suits standard hot-swap bays. It is not for buyers who require hardware-based encryption on the drive itself. Systems limited to PCIe 3.0 or without NVMe support cannot use this drive at its rated speed.

PCIe 4.0 x4 NVMe interface decides compatibility

The single specification that determines fit is the PCIe 4.0 x4 NVMe connection. Your backplane or motherboard must provide this exact electrical and protocol link. If the slot is PCIe 3.0 only, or uses a different protocol, the drive will not operate as specified.

נקודות עיקריות

  • Up to 6000 MB/s sequential read for fast data access
  • Up to 1,000,000 IOPS random read for high transaction workloads
  • 4300 TBW endurance for long write life
  • 5 million hour MTBF for enterprise reliability
  • PCIe 4.0 x4 NVMe interface for modern server platforms

מפרט טכני

BrandSeagate
SeriesNytro 5550M
ModelXP800LE10005
Used ForConsumer
Form Factor2.5" 7mm
Capacity800GB
Memory Components3D eTLC
InterfacePCI-Express 4.0 x4
ProtocolNVMe
Max Sequential ReadUp to 6000 MBps
Max Sequential WriteUp to 1900 MBps
4KB Random ReadUp to 1,000,000 IOPS
4KB Random WriteUp to 140,000 IOPS
Read Latency90µs
Write Latency12µs
Terabytes Written (TBW)4300TB
MTBF2,500,000 hours
Power Consumption (Idle)12.5W
Power Consumption (Active)5W
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Height7.1mm
Width70.1mm
Depth100.4mm
Weight105g
משקל משלוח0.45 kg
מידות האריזה25 × 25 × 25 mm

שאלות על הפריט הזה

How can I confirm the Nytro 5550M is delivering its rated 6,000 MB/s sequential read speed after installation?

Run a sustained 128 KB sequential read test at queue depth 64; the drive should report up to 6,000 MB/s and 90 µs average read latency.

What ships with the XP800LE10005 and what must I source separately?

The bare 2.5" 7 mm drive ships alone; you must supply a U.2 or PCIe 4.0 x4 carrier, 12 V power, and any mounting hardware.

Which capacity in the Nytro 5550M line matches a 3 DWPD workload with 4,300 TB total endurance?

The 800 GB model provides exactly 4,300 TB written and 3 drive writes per day over five years.

גם במדף הזה

לקוחות השוו בין אלה

אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.